Belly Pan Blown Belt Protector

[DMCTurbo]

Albeit on a Cat.... View attachment 136315

Mine sure doesn't look that pretty anymore after sustaining 3 major hits lol

 

[ROCKERDAN]

Mine sure doesn't look that pretty anymore after sustaining 3 major hits lol

It took awhile to clean out all the fibers....geesh.

I got left panel inside here, got here nice and clean but took time!

I knew this protector was gonna be a smart buy

 

[Doc Harley]

It took awhile to clean out all the fibers....geesh.

I got left panel inside here, got here nice and clean but took time!

I knew this protector was gonna be a smart buy

An ounce of prevention. Especially when things get turned up.....

 

[DooZ]

Mine sure doesn't look that pretty anymore after sustaining 3 major hits lol

It's doing it's job then. Has it held it's form after the hits?

 

[DMCTurbo]

It's doing it's job then. Has it held it's form after the hits?

For the most part, I took it off and pounded her flat where it took a big hit at 120+

 

[DooZ]

So you've been customizing it? LOL

 

[ROCKERDAN]

For the most part, I took it off and pounded her flat where it took a big hit at 120+

Where abouts? Mine did not hurt a thing...it slapped across that front small piece alot, saving that plastic. Typically top and bottom dont get pounded but the ends do(front top and rear bottom) as that is where the belts whip off their arc.

Dan

 

[DMCTurbo]

Where abouts? Mine did not hurt a thing...it slapped across that front small piece alot, saving that plastic. Typically top and bottom dont get pounded but the ends do(front top and rear bottom) as that is where the belts whip off their arc.

Dan[/QUOTE

Halfway, directly in the centre of the clutches...

 

[ROCKERDAN]

WOW, Interesting......so with the foam under it, it bend downward eh?

 

[DMCTurbo]

WOW, Interesting......so with the foam under it, it bend downward eh?

Yup bent downward, woulda been a huge hole there had I not installed the protector.

 

[ROCKERDAN]

Yup bent downward, woulda been a huge hole there had I not installed the protector.

Seems like odd place to take a whack.....but when a belt blows it becomes a projectile, likely never the same from one to the next....I just hope its a rare occurrence.

 

[nadekeys]

I blew a belt on my turbo nytro this past weekend, sent a chunk clear through the aluminum plate here right into my shin.... This was the only damage. Threw a new belt on, bent the sharp edges on this hole back that looked like it was hit with a grenade launcher and good to go. Belts blowing can be really dangerous. This is the only time I've ever seen anything like this.

Sent from my SM-N950U using Tapatalk

 

[nadekeys]

I needed a pliers and other tools to bend the pieces back in a bit , it isn't very thin aluminum!

Sent from my SM-N950U using Tapatalk

 

[hibshman25]

For those that have my belly pan protectors that sustained a hit I'd like some pictures. I've yet to blow a belt on mine and would like to be able to monitor how the guards are holding up to different blows.

 

[fatchance]

I placed my order last night Travis.