belt not comming to the top of primary

[darv]

Yes they will do your clutches

 

[brada]

Ya everything is ok I am thinking Machining is the way to go who does it?

http://www.ty4stroke.com/viewtopic.php? ... =overdrive

 

[AIRWOLF]

Ulmer racing will machine your clutches

they did a couple of mine, great job , fast turnaround

 

[charlie]

Thanks airwolf thats what I wanted to the t that helps a lot now I wonder who would be better I am very Happy with Allan's work. Schmidt bros did the clutching on my nytro and was vary happy with it to

 

[pro116]

Every once that I know that machine there clutches on bare ice in a 1/2 mile on apex's with the ripsaw and trails studs run 120-124mph on the gun.Thats at stock ride height.

 

[charlie]

I would be happy with 115 to 118 I just want to beat my friends etec but it will never end

 

[gun nut]

belt

I bought an adjuster in 06. It fits on the secondary bolt. You use an allan wrench to allow you to turn the adjuster by hand, and tighten allen screw.

 

[charlie]

what does the adjuster do i dont really understand

 

[sleddog66]

I think gun nut is talking about belt deflection adjuster on the secondary....instead of shim/washers behind the 3 bolts........................different topic.

 

[gun nut]

belt

Sled dog 66, You're right.

 

[charlie]

Ya ok that what I thought