First time viper owner, in need for advice

[hedjohn]

hi, this is my first Thread here, first time viper owner.. the sled is an xtx se 2014 stock.picked it upp att a local dealer... sled has 930 Miles on it ,1020 km. i have driven 600km on it so far this last weeks.. i am in need of a little help. the sled is over revving /hitting rev limiter on launch in loose snow. should i add more weight/ rivets or get a softer spring? and how do you attach the bag behind the seat ? looks like im missing som knobs for the bag.

 

[Carla 123]

There are 2 nobs that are riveted on to the tunnel for the rear bag and the 2 straps go in the holes under the rear bumper.as far as hitting the rev limiter mine does also if I throttle it at low speeds.mine seems to rev high also at around 9200

 

[hedjohn]

There are 2 nobs that are riveted on to the tunnel for the rear bag and the 2 straps go in the holes under the rear bumper.as far as hitting the rev limiter mine does also if I throttle it at low speeds.mine seems to rev high also at around 9200

i am missing rivited nobs then. where can i find them? part number?

 

[petey_sx700]

Stays 8JP-F8423-00-00 Rivets 8JP-RA516-00-00

 

[MarkB83]

The reving out could be your clutch set up. I can’t post pics (spec sheet) but if it’s the same clutch that’s in my 2016 you need more weight at lower elevations.


Sent from my iPhone using Tapatalk

 

[cannondale27]

Welcome here! Yes you need to add more wieght to primary. If it's at launch only put wieght in heel. If it's at top speed add it to tip.