Hindle, OSP or D&D?

[Yamadog]

Yamadog, i noticed the sensor on the pipe before the can isn't there. if its not hooked up will i have a code show up on the display?

This is the can for the turbo version the bungs are located in the tube just passed the turbo. I do not think this will work without modding the stock exhaust. I don't know if MPI has a can for a non boosted sled

 

[YamahaTim]

I can't find the MPI exhaust lol would be nice to hear it too.

Look at some of my videos, you can hear it there.

 

[Harleywarden]

OSP can install

I installed the OSP can i dont wanna blow my motor any advice would be appreciated. i got missing happening when i hit wide open throttle through the rpm range when its really pulling. will it dial itself in or does the ecm need some mapping?

 

[Srxspec]

If you've got a miss at wide open throttle are you sure you are not hitting the rev limiter?

Also MPI does not have a can that will fit onto a stock sled. The muffler they use on the turbo sleds becomes pretty loud when run on a stock sled because the turbo is not there to help quiet it down.

 

[csederlund]

Re: OSP can install

I installed the OSP can i dont wanna blow my motor any advice would be appreciated. i got missing happening when i hit wide open throttle through the rpm range when its really pulling. will it dial itself in or does the ecm need some mapping?

I had the OSP can. You are hitting the rev limiter. You need clutching done.

 

[DeerHuntr]

Anyone tried a ultra or super q yet?

 

[ulinov1049]

D&D it is

 

[Yamadog]

Re: OSP can install

I installed the OSP can i dont wanna blow my motor any advice would be appreciated. i got missing happening when i hit wide open throttle through the rpm range when its really pulling. will it dial itself in or does the ecm need some mapping?

Just before I pass the camera you will hear it I am just pinging off the rev limiter - it is not a miss the gauge rpm may say 1 thing but the rev limiter is in real time

http://youtu.be/SelTlHriHFI

 

[bottlerocket]

I believe Mr Ulmer told me you never want to here the rev limiter. My dealer added 3 grams per arm on mine because of this.

 

[yamagone]

We have the hurricane hindle full power kit instock. This kit is unique in that it comes with mid pipes that will use a hindle muffler or a stock muffler in the same kit. The full exhaust complete with air box mod and Pcv makes 17hp

Will this change that much over stock? The stock Viper needs a lot more than 17 hp to even compete with 600 class sleds!

I thought I read that the LTX was .2 seconds faster at the Old Forge Shootout than any other 2 stroke and .4 seconds faster than the closest 4 stroke.

 

[Nytro40th]

You heard right.

 

[Ehlett]

Who carries the d&d mufflers?

 

[Nytro40th]

Who carries the d&d mufflers?

D&D racing carries there own mufflers.

 

[Ehlett]

Who carries the d&d mufflers?

D&D racing carries there own mufflers.

Ok thanks. I just didn't see it on their site. I see in your post you have a hindle slip in. How is it compared to stock? Is it much louder? Hindle is really close to me, and I have always been happy with the quality of their mufflers.

 

[Nytro40th]

I like it very much. Its has a deep throaty sound without being obnoxiously loud. It is a quality built item, it is lighter than stock and you have access to the chain tensioner. I have received quite a few compliments on the sound. D&D has there muffler available I believe but it is not on their site yet.