How to: 2011 Yamaha Apex track change Video

[MrSled]

How to: 2011 Yamaha Apex track change Video

 

[biffdotorg]

Thanks for the quick tip on the parking brake. I have often struggled with getting it adjusted by the cable, and can't say that I have ever looked it up in the service manual. As it seemed straight forward to adjust the cable. And it never held since. Nice tip.

I'm assuming that was an SE with rail extensions. It looked like rail extensions in the skid.

 

[MrSled]

Thanks for the quick tip on the parking brake. I have often struggles with getting it adjust by the cable, and can't say that I have ever looked it up in the service manual. As it seemed straight forward to adjust the cable. And it never held since. Nice tip.

I'm assuming that was an SE with rail extensions. It looked like rail extensions in the skid.

Your welcome!! Yes sir, it was a SE with extensions and Mega Float was changed out.

 

[Bluebullet]

Great vid Tom!

 

[MrSled]

Great vid Tom!

Thank you !

 

[03RX1-ER-LE]

Thank you !

Now you need to do a Apex valve adjustment video.

 

[MrSled]

Now you need to do a Apex valve adjustment video.

on the motor?

 

[03RX1-ER-LE]

I know you have the one for the EXUP valve check and adjust, thought if you were bored you could do the 20 valves in the motor.

 

[MrSled]

I know you have the one for the EXUP valve check and adjust, thought if you were bored you could do the 20 valves in the motor.

Thats no easy job.. thanks but most guys wont be able to do that.

 

[apexrrrrrrr1]

awesome video, what table do you use? would you recommend it?

 

[MrSled]

awesome video, what table do you use? would you recommend it?

Handy lift!! Love it

 

[maim]

valve set is going to dealer on 11 at end of season.

 

[03RX1-ER-LE]

valve set is going to dealer on 11 at end of season.

I got many more miles before mine would need to be done, after wrenching since the early 70s I have worked with a lot of wanabe Techs. I don't know if I could trust someone to do such an evasive repair. I will do it myself so I know it will be done right.

 

[maim]

i have done it with the shim and bucket on my xt350 and that sucked even as a 1 lunger and i had shims for it. with the apex, i would have to take it apart, order the shims and then remeber how to put it back together probably a month later without being disturbed by some one........i am not that lucky.

good tips on the e brake as i never seem to get it to last when i set it.