Hurricane turbo intake upgrade

REDLINE 1 said:
Keep an eye on the coolant hose and hose clamp that runs over the top of it. You may have to clearance it so it doesn’t interfere and rub against it. I used a heat gun and a piece of pipe to dent it to clear this area
Click to expand...
Good ole fashion sucker punch!!
 
Made a clamp guide to cut stock intake. Am I correct in assuming the cut line from bov inlet is 1.25"?
Also, Redline1 claims the coolant hose clamp above intake has the ability to rub thru the top of Hurricane intake. There's zero gap, Definitely real tight. Surprised no one else noticed this and said something.
20251007_161456_copy_2000x1500.jpg
20251007_160624_copy_2000x1500.jpg
 
Doc Harley said:
Made a clamp guide to cut stock intake. Am I correct in assuming the cut line from bov inlet is 1.25"?
Also, Redline1 claims the coolant hose clamp above intake has the ability to rub thru the top of Hurricane intake. There's zero gap, Definitely real tight. Surprised no one else noticed this and said something.
View attachment 179163View attachment 179164
Click to expand...
1 5/8”.
 
Wow, glad I asked!! Wonder what this is???

20251007_170227_copy_1500x2000.jpg
 
Last edited:
REDLINE 1 said:
Weird. I guess cut it at 1 5/8 and if it’s too long shorten to 1.25 lol
Click to expand...
Here's the whole sheet I've had. It's pretty old and wanted to verify any changes with you guys.
20251007_171052_copy_1500x2000.jpg
 
Mine didn't come with any instructions or glue. Lined it up and and cut. Wouldn't want to have anything as far as sealant/glue inside the tube that could work loose and make it's way into the intake.
 
fatchance said:
Mine didn't come with any instructions or glue. Lined it up and and cut. Wouldn't want to have anything as far as sealant/glue inside the tube that could work loose and make it's way into the intake.
Click to expand...
Hopefully we can come to some consensus on a measurement. Very odd, two different instructions. Come on, Dave!! Lol
 
Here’s a pic of where I cut mine. This is the discarded part. Note the clearance depression molded into the stock tube for that coolant hose. The hurricane piece doesn’t have that relief and that’s where it makes contact
IMG_3790.jpeg
 
If there is any confusion I just inserted the tube into the flange at the turbo end as tight as it would go (one could use a little heat), after measuring where the tube would get inserted into the air box and cut off enough so the crossover tube would mate with the air box
 
IMHO...if you and your buddy are in a dead heat and he decides to install this contraption....you've already won!!
20251008_121754_copy_2000x1500.jpg
 
Just took the cover off the sled...
Time to tear it apart for this intake tube and power steering... and wait that's not all!!!
:dunno: :sled2:
 
You must log in or register to reply here.

Similar threads

A
New to me Sidewinder LTX with Hurricane 270 flash
2
Replies
23
Views
6K
jeff_yam
jeff_yam
S
Sidewinder header.
Replies
8
Views
2K
Hammer70
Hammer70
Sledroll
Upgrade with Super Spool
2
Replies
16
Views
3K
1nc 2000
1nc 2000
F
Differences between Hurricane 290 and 300hp trail muffler bundles.
Replies
8
Views
1K
1nc 2000
1nc 2000
J
Questions about Hurricane Tunes
2
Replies
18
Views
4K
Joshua
J


Back
Top