just purchased a 2018 sidewinder 137 with a 1.25 lug track looking for stud length recommendations ?

[Sidewinder 02]

looking for help on stud length and amount of studs to install on this sled ?

 

[Hammer70]

1.450 GD 3 per bar IMO,also depends on what riding style you do.

 

[DMCTurbo]

I run 1.575 megabites. Make sure to run your track tight and you won’t have any issues.

You can also use the search function as this topic has been discussed plenty of times.

 

[Sidewinder 02]

1.450 GD 3 per bar IMO,also depends on what riding style you do.

I used to run a 1998 Thunder cat ,,with 210 HP and I ran 300 studs...hooked up great ..I kinda ride aggressive trail and don't want to spin out hooking up

 

[Hammer70]

Wow and that did push you in the corners. Good luck I’m sure there will be a lot of people chiming in.

 

[Sidewinder 02]

no it did not push in corners ...

 

[Hammer70]

no it did not push in corners ...

Awesome

 

[full tilt viper]

1625's

 

[KnappAttack]

I run 192 1.45" sharpened Megabites. Hooks like a cat on a screen door. Actually it hooks a little too good for a trail sled. I'd do 3 per bar next time.

 

[DMCTurbo]

I run 192 1.45" sharpened Megabites. Hooks like a cat on a screen door. Actually it hooks a little too good for a trail sled. I'd do 3 per bar next time.

View attachment 142411


View attachment 142412

I'm sharpening my Megabites as per your instructions as we speak. I'm dropping from 192 to 144. I'm anxious to try them on ice.

 

[**sj**]

192 1.630 lake racers with stm tunnel protection... judging from your past... you expect to hook up... go big or go home

 

[snowdust]

I'm sharpening my Megabites as per your instructions as we speak. I'm dropping from 192 to 144. I'm anxious to try them on ice.

Are you guys sharpening with the biteharder tool?

 

[DMCTurbo]

 

[Crossfire12]

Wow 1 at a time,I used the one that goes on the drill and sharpen them on the track , biteharder sharpener for studs. Great product

 

[DMCTurbo]

Wow 1 at a time,I used the one that goes on the drill and sharpen them on the track , biteharder sharpener for studs. Great product

Ya this is a little tedious. So that said did you buy the professional version of the biteharder?