Bought a Papa windshield and it came with the support struts. Really didn't want to use the struts. Install the windshield without them. First ride out at around 80mph the shield bent down and at 90mph the nose of the windshield mount popped out. Came up with some ideas to ease the stress on the pod and keep the shield from popping out.
Made up an aluminum piece that screws onto the headlight itself and slides into a slit I made in the airbox. Also reinforced the headlight pod mounts with some bolts and spacers.
Made up an aluminum piece that screws onto the headlight itself and slides into a slit I made in the airbox. Also reinforced the headlight pod mounts with some bolts and spacers.
albis65
Newbie
- Joined
- Mar 24, 2022
- Messages
- 2
- Age
- 59
- Location
- sudbury ont
- Country
- Canada
- Snowmobile
- 2022 Polaris xcr 850
Where can I get a tall windshield like that one
- Joined
- Apr 13, 2003
- Messages
- 21,475
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
This might be a good addition to Apex Q&A page.
Check the Classifieds on here or your local Kijiji.
You may move if you like.
- Joined
- Apr 13, 2003
- Messages
- 21,475
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
I’ll just set up a link.You may move if you like.
Similar threads
