uzeste
Veteran
Anyone tried it or herd it yet. Love the sound of them on a 2 stroke I would like to try one on my nytro.
Nikolai
TY 4 Stroke God
I have one on the way. Should be here in a week or two. I'll give a full report.
BCB racing
Newbie
Took a can from a REV 800 and custom mounted it the same as factory, plastics cover it and all , awesome sound and cheap
Goddo
Expert
BCB racing said:Took a can from a REV 800 and custom mounted it the same as factory, plastics cover it and all , awesome sound and cheap
That's nuts man...I'd love to see pics of that. I'm surprised that a 2 stroke can would work properly on a 4 stroke, but I'm no exhaust expert.
Love to see a pic and soundclip of that.
SilentSno
Expert
- Joined
- Mar 6, 2007
- Messages
- 271
- Age
- 40
- Location
- Montana, USA
- Country
- USA
- Snowmobile
- 2008 Yamaha FX Nytro MTX
Goddo said:BCB racing said:Took a can from a REV 800 and custom mounted it the same as factory, plastics cover it and all , awesome sound and cheap
That's nuts man...I'd love to see pics of that. I'm surprised that a 2 stroke can would work properly on a 4 stroke, but I'm no exhaust expert.
Love to see a pic and soundclip of that.
For the most part, the exhaust can on both the 2 stroke and 4 strokes are just silencers and aren't required to run the sled properly.
Obviously 2 strokes need tuned pipe(s) to keep back pressure in the cyclinders that a 4 stroke doesn't require due to it having a valved head.
Nikolai
TY 4 Stroke God
I recieved my exhuast yesterday and installed it. I think it sounds great. I took some pics and will post them later.
Nikolai
TY 4 Stroke God
Sounds good, fits good, gained a few RPM, but it now has a slight bog/hesitation when you hammer the throttle. Might put the stocker back on as it ran perfect.
uzeste
Veteran
Nikolai
If you want to sell it I would buy it for sure. Sometimes I feel that my machine has a slight bog/hesitation a bit off bottom completely stock.
If you want to sell it I would buy it for sure. Sometimes I feel that my machine has a slight bog/hesitation a bit off bottom completely stock.
A guy on snowest said he cured the stutter by adjusting the CO level. This was with a slip on muffler.
Ill be installing my MBRP next week, hope it runs right
Ill be installing my MBRP next week, hope it runs right
uzeste
Veteran
Do you know how how he ajusted it. Or the link to the info
took this off Snowest
ok this is top secret!! in your nose cone area you will find a single wire in a white connector.. remove connector and ground wire, then turn on key and depress both buttons on dash. navagate through menu till CO appears then chose cylinder 1,2, or 3. change setting to -15 on all cylinders. ride sled and see if bog is gone if not change to -17 or -20 ect.
you didnt hear this from me
ok this is top secret!! in your nose cone area you will find a single wire in a white connector.. remove connector and ground wire, then turn on key and depress both buttons on dash. navagate through menu till CO appears then chose cylinder 1,2, or 3. change setting to -15 on all cylinders. ride sled and see if bog is gone if not change to -17 or -20 ect.
you didnt hear this from me
uzeste
Veteran
sounds good man
I didn't read anything!!!!
I didn't read anything!!!!
uzeste
Veteran
Got the MBRP on sound great. A little louder then I thought it would be. But MBRP's are always loud. Sled seamed to run great no problems so fare.
yami ryder
Pro
I have a excell and I have a bog or hesitation also you can hear it, a double burp out of the exhaust.
Similar threads
- Replies
- 11
- Views
- 2K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.