Phazer MTX/MTN LT Handlebar Risers

[njc89]

Our '07 Phazer's handlebars are a bit low, but the stock riser block makes normal aftermarket 2" riser blocks unworkable due to the bolt length. What are some of you doing to get a little more height in your bars? How much can you rise with the stock cables? Thanks for the help.

 

[yukonranger]

I'm using a rsi pivoting riser with adapter and rsi backcountry bend bars. I am 6'2" and I can stand straight with my arms bent. I had to use an extended legth brake line and build a new throttle cable. I think you can go about 2 in higher with stock cables.

 

[Idaho Nytro]

I put bars off an 06 vector mtn SE on mine .

 

[Vmax4]

I would be interested in your bars if you part with them......

 

[slymax]

I have a 2" Rox pivot riser on top of the factory block, works and looks good. All stock cables, not sure how much higher you could get away with. If I rode it all the time I would probably go higher, I am 5'10".

 

[alxsno]

ya i did what slymax did the other night, just flipped the throttle cable under the handlebars and they are long enough for sure, at least with the 2"

 

[Turtle]

We have full risers kits available for the Phazer. Our risers kits accomodate the stock speedo mount, and we can even make accomodations for a windsheild mount. The kits are even a pivoting style of riser.

Check out our website in my signature below.

 

[phazerboost]

I put a 3" power madd pivot riser on with the stock cables.

 

[Phazed-Coug]

Rox 2 inch pivot riser is perfect..

 

[backcountrymafia]

i also have the rox pivot riser , good quality stuff, just flipped the throttle cable and let her rip. then i bent my bars across my back, still sore. will be purchasing 07 apex bars from the dealer for 50$ with grips on them. apex bars also have more rise built into them than the phazer bars, i cant wait.

 

[GT03235]

2.5 rox riser just about got away with standard cables

 

[prozac500]