Removing shim from secondary will raise belt how high?

[sethryder]

Hey guys,
Cleaned up my secondary and put on a new belt. My new belt sits about flush with the top of the secondary. I would like to raise the belt 1.5mm as specified in the manual. Anyone know aprox how high the belt will raise if i remove one shim from between the secondary sheaves? If someone knows it will be more than 2mm I wont bother.
Thanks
Ps. Where do u guys put the shims after u remove them?

 

[Grimm]

You are gonna have to add shims to raise the belt, not remove them.

 

[yamahas]

With the stock phazer you remove shims to raise the belt. The shims sit between the sheaves. Unless I'm mixed up, haven't run the phazer secondary in a few years.

 

[sethryder]

You are corret, the shims sit between the secondary sheaves. It is my understanding that removing shims will bring the sheaves closer together thus raising the belt height. I think it is different on another yamaha model but not with the phazer.

 

[Grimm]

My bad...I didn't realize this. I thought it was the same as the rest of the Yamahas.
Sorry sethryder for the misinformation.

 

[sethryder]

No worries. So anyone have an idea of amount of belt height increase with removing a shim?

 

[MikeWalters]

i thought you could get different thicknesses of shims..??