Charged RTX
Expert
Has anyone used the Skorpion studs. I want to run a 1" track and an aggresive stud but not a steel chisel that will wear quickly. I,m woried that the carbide will chip easily on these. 
impalapower
TY 4 Stroke God
I run Roetin skaggs, I heard the studs snap easily, so I've used Woodys.
Their runners are OK but I believe the studs suck.
Charged RTX
Expert
You guys are full of good news, any recomendations on something very aggresive besides a steel chisel.
SIMMER
TY 4 Stroke Master
ROETIN Hornets were the best stud I have ever used....they are lightweight and super strong. I put 96 down the center in my 2003 RX1 and never had a problem.
- Joined
- Apr 13, 2003
- Messages
- 21,492
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
I have ran ROETIN Hornets on several sleds...they do work really great and are not what they use to be as far as quality.
The Woodys chisels are very nice for your application as is the thruster.
Regarding Roetins quality. IMO the Hornet is the best stud on the market for trail applications. Best penetration by far vs. gold diggers, power points, mega bites, warthogs. Roetin had a production problem last year but have been told they were recently bought out and will be up and running soon...BBY
Regarding Roetins quality. IMO the Hornet is the best stud on the market for trail applications. Best penetration by far vs. gold diggers, power points, mega bites, warthogs. Roetin had a production problem last year but have been told they were recently bought out and will be up and running soon...BBY
Should also add because of the narrower profile of the hornet they simply cant be as strong as thicker studs out there, thats why its important not to understud...BBY
Mighty
TY 4 Stroke God
- Joined
- Apr 17, 2003
- Messages
- 4,794
- Age
- 61
- Location
- Grand Ledge Michigan USA!
- Country
- USA
- Snowmobile
- 22 Mach Z
23 Sidewinder SRX
Woody's Megabites 
Mega bites if your lookign for longevity. Hornets a close seond on longevity but 5 times the performance with penatration
cadman
Veteran
Length ??
Why run 1" studs vs. 1-3/8" on 1-1/4" Ripsaw. I have woody SS 1-3/8" on my 05 Rx1. I checked mine out to make sure ok so I can sell the sled and they seem fine. 96 up the middle?
Why run 1" studs vs. 1-3/8" on 1-1/4" Ripsaw. I have woody SS 1-3/8" on my 05 Rx1. I checked mine out to make sure ok so I can sell the sled and they seem fine. 96 up the middle?
A
Anonymous
Saber carbides good - studs bad
I had great luck with saber runners , but was NOT impressed with their studs.
I had great luck with saber runners , but was NOT impressed with their studs.
impalapower
TY 4 Stroke God
MrSled said:
I'll admit, this poor stud quality was 12 years ago, maybe things have changed.
Mighty
TY 4 Stroke God
- Joined
- Apr 17, 2003
- Messages
- 4,794
- Age
- 61
- Location
- Grand Ledge Michigan USA!
- Country
- USA
- Snowmobile
- 22 Mach Z
23 Sidewinder SRX
I disagree about the performance Jason. My dealer first put me on to Megabites a few years back after their 1st season. He said they worked so well for the racers that they were using less with the results of a track with more standard type studs.jtssrx said:
MightyWarrior said:
Dan, thats because they are durable. Jason is refering to penetration through Ice, and hardpack. Nothing better on the market in the trail stud category than a hornet with regards to penetration. Ive run them all and can attest to this. Try them sometime, you might be surprised how much better they are...BBY
