Gongshow77
Extreme
- Joined
- Sep 14, 2015
- Messages
- 55
- Reaction score
- 4
- Points
- 68
- Location
- Canada
- Country
- Canada
- Snowmobile
- 2014 Sr Viper XTX
I have a 2014 viper xtx se with bender clutch kit and D&D pipe. Not looking to add a turbo just wondering what everyone that's n/a has for power add ons. I'm looking to hit 100mph consistently and wondering what I should do next. Thanks!


- Joined
- Apr 13, 2003
- Messages
- 21,640
- Reaction score
- 9,264
- Points
- 2,103
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
Not going to happen. Trail conditions are everything on that sled. But read in the Viper Sections.. this topic has been beat to death.
Yup with the gearing on xtx turbo the only way to get over 100 mph once you get over 210 HP then gearing change 124 is possible. My 14 at 260 HP on ice stock gears was 114 max.
Joe ltx-le
TY 4 Stroke God
- Joined
- Mar 26, 2015
- Messages
- 1,524
- Reaction score
- 589
- Points
- 988
- Location
- Beaverbank-ns
- Country
- Canada
- Snowmobile
- 2017 sidewinder ltx-dx
Trail conditions are everything. As mr sled said. I have an mpi trail turbo. Sometimes I can only see 105 -108. Other days 120 comes easy.
Joe ltx-le
TY 4 Stroke God
- Joined
- Mar 26, 2015
- Messages
- 1,524
- Reaction score
- 589
- Points
- 988
- Location
- Beaverbank-ns
- Country
- Canada
- Snowmobile
- 2017 sidewinder ltx-dx
Consistency is a big problem with these sleds , that's what I find anyway.


murdered141
Snow Punisher
- Joined
- Nov 24, 2015
- Messages
- 1,470
- Reaction score
- 902
- Points
- 1,228
- Location
- U.P Michigan
- Country
- USA
- Snowmobile
- Yamaha sr viper 15 ltx dx, mpi 190 turbo, straight line header, 38" mtx front end, mtx steering, mtx seat, xtx 141" skid and 2.25" power claw track
2019 sidewinder xtx le, sleeping for now
N/A sled's with the right bolt ons will do 105 one day and then struggle to get into the upper 80's the next, snow conditions suck, but we're lucky to have them.
Joe ltx-le
TY 4 Stroke God
- Joined
- Mar 26, 2015
- Messages
- 1,524
- Reaction score
- 589
- Points
- 988
- Location
- Beaverbank-ns
- Country
- Canada
- Snowmobile
- 2017 sidewinder ltx-dx
Well said.N/A sled's with the right bolt ons will do 105 one day and then struggle to get into the upper 80's the next, snow conditions suck, but we're lucky to have them.


murdered141
Snow Punisher
- Joined
- Nov 24, 2015
- Messages
- 1,470
- Reaction score
- 902
- Points
- 1,228
- Location
- U.P Michigan
- Country
- USA
- Snowmobile
- Yamaha sr viper 15 ltx dx, mpi 190 turbo, straight line header, 38" mtx front end, mtx steering, mtx seat, xtx 141" skid and 2.25" power claw track
2019 sidewinder xtx le, sleeping for now
My best was 108 on 20° morning on a frozen groomed trail without a single track in it, modz we're ulmers3 k&n intake, sandale can, big venom clutch kit, 4 extra wheels on skid and DuPont hifax. Now with the Evo stage 4 flash, straight line header and machined clutches hoping for 115 on the right day. 

Yes that may be on an LTX but not a N/A XTX with 141" 1.6" track and much lower gearing. The chart says hypothetical speed of 116 with 21/41 gears 8 tooth 3.0 driver but that's a pipe dream.
But here is a XTX during break in (224 miles) only pulling 8450 RPMS and hit 114 MPH Later that day pulling 8600 she did 118 and had plenty to go.
But here is a XTX during break in (224 miles) only pulling 8450 RPMS and hit 114 MPH Later that day pulling 8600 she did 118 and had plenty to go.


murdered141
Snow Punisher
- Joined
- Nov 24, 2015
- Messages
- 1,470
- Reaction score
- 902
- Points
- 1,228
- Location
- U.P Michigan
- Country
- USA
- Snowmobile
- Yamaha sr viper 15 ltx dx, mpi 190 turbo, straight line header, 38" mtx front end, mtx steering, mtx seat, xtx 141" skid and 2.25" power claw track
2019 sidewinder xtx le, sleeping for now
Yes the sled is an ltx dx 137, 24 50 gears, but I do run the 1.6 ice cobra since new.



Clamb
Lifetime Member
- Joined
- Oct 2, 2016
- Messages
- 145
- Reaction score
- 64
- Points
- 663
- Location
- Peoria IL
- Country
- USA
- Snowmobile
- 02 Sx viper Er 15 sr viper xtx
- LOCATION
- Peoria il
On a unrelated thought is that a kill teather on your sled and if so were did u get itYes that may be on an LTX but not a N/A XTX with 141" 1.6" track and much lower gearing. The chart says hypothetical speed of 116 with 21/41 gears 8 tooth 3.0 driver but that's a pipe dream.
But here is a XTX during break in (224 miles) only pulling 8450 RPMS and hit 114 MPH Later that day pulling 8600 she did 118 and had plenty to go.
View attachment 121581
ccmviper
Pro
- Joined
- Sep 11, 2016
- Messages
- 183
- Reaction score
- 94
- Points
- 313
- Location
- Newfoundland
- Country
- Canada
- Snowmobile
- 2010 Nytro xtx
2016 Viper MTX 141
2018 M8000
What are guys getting on their stock sleds?The XTX le and MTX 141's.
DranttelSS
TY 4 Stroke Guru
- Joined
- Oct 9, 2014
- Messages
- 930
- Reaction score
- 783
- Points
- 1,208
- Location
- St. Peter MN
- Country
- USA
- Snowmobile
- 2007 Yamaha Attak
- WEBSITE
- www.dranttelsalesandservice.com
On a unrelated thought is that a kill teather on your sled and if so were did u get it
Yamaha offers a kit, very simple install.
Sent from my iPhone using Tapatalk



Clamb
Lifetime Member
- Joined
- Oct 2, 2016
- Messages
- 145
- Reaction score
- 64
- Points
- 663
- Location
- Peoria IL
- Country
- USA
- Snowmobile
- 02 Sx viper Er 15 sr viper xtx
- LOCATION
- Peoria il
Yamaha offers a kit, very simple install.
Sent from my iPhone using Tapatalk
Yup it's like $25 and 15 minute install works greatOn a unrelated thought is that a kill teather on your sled and if so were did u get it
Similar threads
- Replies
- 4
- Views
- 519
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.