viper with 1.25 ripsaw track what to do?

[TOMBOB]

best friend bought a 1.25 ripsaw track from nelson's this summer. was told
it would work. we did the everything on the skid to make new again.
installed it all back together and now the track is hitting on front cooler protectors.

here is the question- do we trim down the track or leave it as and let it
ware down by it self.

thanks for any advice.

tombob

 

[bottlerocket]

I would trim it not let it rub. How much needs to come off?

 

[TOMBOB]

viper ripsaw track

i am guessing about .5 inch. going take off the trailer tomorrow

 

[Ding]

Many guys have just let them wear in. I prefer to notch the track. If you are never going to stud you can pull the protectors.

You can find lots of posts on this over on the 2-stroke side.

 

[moab11]

My dealer told me to just let it wear in, they installed it so I figured why not?

I put about 7000km on that track before I sold the sled, it did need to be replaced then, but never gave me any problems.

 

[TOMBOB]

vector with 1.25 ripsaw track

ding,

where is two the side?

thanks guys for info

tombob

 

[moab11]

www.totallyamaha.net

 

[TOMBOB]

iper with ripsaw track

took your advice notched the track. took less half hour with two guys

sorry i posted this here did not know about two stroke side.

thanks again guys

tombob