Unluckydiablo
Expert
snowmanx said:
Wait, didn't you already take pics? I'd like to see it as it landed myself, not after its been dragged, mauled, and hauled out of a field and to a shop.
snowmanx
Newbie
sorry I only have pics of the sled and the spot seperate not both together. When u get a concussion and wreck your sled the last thing on your mind is to take pics of the sled as it sat on the field. - sorry!
08NitroRTX
VIP Member
oh I think current pics of the sleds condition would be fine!!
Oh and as with others glad your ok! or as ok as can be expected after playing the human rag doll!!
Oh and as with others glad your ok! or as ok as can be expected after playing the human rag doll!!
skyboz
TY 4 Stroke Junkie
08NitroRTX said:
Dude, you're hilarious!!! LOL!! May as well tell him to just get a clean shop towel and some Mother's - she'll buff out!!!
rightarm
TY 4 Stroke Master
gormleyflyer2002
TY 4 Stroke Junkie
glad your OK......well, maybe not, but could havce been worse. Not sure I would want to ride the sled again and for sure hope you can get to the bottom of what exactly caused this ......?
Unluckydiablo
Expert
Wasn't implying you did anything wrong, and I certainly might not have had the presense of mind to take pics, just wanted to see the condition of the sled as it lay. I know that after hauling a sled that crashed out of the woods, some other things got broken that weren't initially, just trying to get an idea of it. Once again, glad you are relitively ok.
08NitroRTX
VIP Member
How about we look at that sled of Yugi's a little closer!!
That's NOT a production FX Nytro
Exhaust goes above the tunnel
rear skid diffrences
different shocks
different plastic
And what they have to hold together got say 2 miles and canbe rebuilt for the next 2 hours for 2 more miles?
Ok I've said enough..
Not a good comparison!
That's NOT a production FX Nytro
Exhaust goes above the tunnel
rear skid diffrences
different shocks
different plastic
And what they have to hold together got say 2 miles and canbe rebuilt for the next 2 hours for 2 more miles?
Ok I've said enough..
Not a good comparison!
08NitroRTX
VIP Member
Lets look a another factory race sled shall we? Johan riding Cory Davis sled @ Duluth last month
hmm spindles, a-arms, rear skid all appear slightly different and again exhaust exits above the tunnel.... I see a pattern!
hmm spindles, a-arms, rear skid all appear slightly different and again exhaust exits above the tunnel.... I see a pattern!
2008 Nytro RTX
TY 4 Stroke God
Can we get side by side comparasion??
08NitroRTX
VIP Member
<--- is lucky to be able to post pics
I can't manipulate them!! lol
I can't manipulate them!! lol
2008 Nytro RTX
TY 4 Stroke God
Hahaha,Maybe someone will be able to do it for us.
sedz
Extreme
Same sorta thing happened to me!
I have been saying all along that these spindles are not strong enough to jump with at all!
There are way thicker ones on the Venture light sleds that should be on the nytros.
I have been saying all along that these spindles are not strong enough to jump with at all!
There are way thicker ones on the Venture light sleds that should be on the nytros.
08NitroRTX
VIP Member
as I said before the venture is different as to where the steering tie rod bolts up. Not saying can't be made to work! But not a direct swap! Anything can be made to work but there are much cheaper fixs to the illedged spindle problem ......
cdsgraphic
Extreme
spindle differences
Hey guys, I'm usually posting on the phazer side, but I read your posts all the time (yeah I want a FX Nytro!) learning everything I can about this sled, good and bad. Anyway you ask for a comparison on the spindles, so here it is....
There are lots of obvious differences between the production (right) and race (left) spindles.
Trevor
Hey guys, I'm usually posting on the phazer side, but I read your posts all the time (yeah I want a FX Nytro!) learning everything I can about this sled, good and bad. Anyway you ask for a comparison on the spindles, so here it is....
There are lots of obvious differences between the production (right) and race (left) spindles.
Trevor
