apex

Hi guys, I need a little help. Those of you with stock Apex xtx rear suspension, I need to find out how wide the shock eyes are on the center rear shock on the skid. Why I ask this, is I need to know if the Apex xtx rear shock will work on my Apex mountain suspension, I know the shocks are the...

Hi guys so I wanted to replace the spark plugs on my Apex, and 2 out of the 4 plugs this is what I found!! Sled has 4,300 miles on it runs great, just wanted to replace the spark plugs. Why all the rust around the spark plugs/ coils? What is this from? Note the coils where fully seated down on...

Hi guys on my 07 Apex mountain I have a 23T top gear, and I think stock bottom 40T gear on it. I want to add reverse to this sled, so am going to buy a good use complete chaincase from a Apex gt. Now I know the gearing is going to be off. My question is I want to set up the new chaincase to have...

Hi guys on my 07 Apex mountain I have a 23T top gear, and I think stock bottom 40T gear on it. I want to add reverse to this sled, so am going to buy a good use complete chaincase from a Apex gt. No I know the gearing is going to be off. My question is I want to set up the new chaincase to have...

Hey Guys! I just picked up a 2007 Yamaha Apex Attak. This is my first time owning a 4-stroke sled and I am loving it so far. A question I have is this switch on the lower left side of my dash which I was told is the Yamaheaters. The led lights up green sometimes, sometimes flashes between red...

So my 2006 apex engine gets extremely hot, has very poor throttle response, runs extremely rich, has no power. It's done this since the day I bought the motor 5 years ago. Since then, i rebuilt it with low compression wiseco turbo pistons and wiseco head gasket that came with it (and i turbo'd...

Fyi I also posted this under the Apex mountain section, but there does not seem to be as many guys on that area as the Apex general. So here goes, guys I have a 2007 Apex mountain with 3,000 miles on it, all stock. I am bottoming out pretty easy on the rear skid. The torsion springs are set to...

Hoping some you guys can help me out on this issue. On my Apex I was doing the oil change and when I took the access plate off for the drain bolt (motor drain bolt) a huge nut fell out of the access plate. So I found out where it goes, goes to one of my front motor mounts on my sled. Now that...

Hi guys, so I have a 2007 Apex mtx I bought with no reverse. I am wanting to add reverse to it. So I can get the whole complete chaincase with reverse for around $340. Here is the problem, the ones that I am looking at are for gt/ ltx models so the gear ratio's will be off. So my question is can...

Hi guys. Currently I am driving my 08 vector. But want to get an apex mtx, for off trail riding only, and keep using my vector for trail riding. So there is a 2007 all stock apex mtx for sale near me, with 2,500 miles on it. The problem is, no reverse on it. What are the part numbers for the...

The Single Shot Solution Rev2! Hygear Suspension has developed a coil over solution for the Yamaha Apex and Vector chassis using the single shot rear suspension. The undersized stock 1.5 float shock is replaced with a much larger 2.0 Fox Coil platform that is built using Hygear Suspension’s...

Hey guys I found a post where someone gutted there stock apex exhaust on a 2006 I was wondering if I could do it on a 2011 apex. It has exup so I wanted to know if it will mess with the system or if I will have to do anything differently when gutting it. Thank you.

Hello, I am new to the forum and I am trying to find out how to order a set of Up Bushman’s spindle bushing for my 2011 Apex XTX. Any help would be greatly appreciated!

I don't really like the stock orange color, I was thinking about putting in blue LEDs. Is there any direct replacement LED bulbs that will fit? Is there anything else to look out for when swapping them out?

LOOKING FOR FEEDBACK FROM APEX XTX 1.75 OWNERS, PLEASE! Tunnel Protectors I ride a 2011 Apex XTX to which I recently added a 1.6 Ice Cobra track. I have removed the original tunnel protectors for additional clearance but I am still concerned about protecting the exhaust and cooling systems...

Looking to upgrade to the HD torsion springs for my skid on my 2011 Apex XTX. What is the weight recommendation for the upgrade? Running mine on H now and have it bottoming out some. I am 220lbs plus gear and tunnel bag. Original springs from new. Looking for thoughts.

Does anyone have pics of the OEM Apex skid plate mounted? Does it cover back to the bulkhead and front exchanger?

Does anyone know or can point me in the right direction. Looking for the torque pattern and specs for the oil pan. I believe they can it a strainer pan? Know its usually from the center out, just wondering the pattern, stages and ft/lbs. Thanks

The Single Shot Solution! Hygear Suspension has developed a coil over solution for the Yamaha Apex and Vector chassis using the single shot rear suspension. The undersized stock 1.5 float shock is replaced with a much larger 2.0 Fox Coil platform that is built using Hygear Suspension’s custom...

The Single Shot Solution! Hygear Suspension has developed a coil over solution for the Yamaha Apex and Vector chassis using the single shot rear suspension. The undersized stock 1.5 float shock is replaced with a much larger 2.0 Fox Coil platform that is built using Hygear Suspension’s custom...