apex

The Single Shot Solution! Hygear Suspension has developed a coil over solution for the Yamaha Apex and Vector chassis using the single shot rear suspension. The undersized stock 1.5 float shock is replaced with a much larger 2.0 Fox Coil platform that is built using Hygear Suspension’s custom...

The Single Shot Solution! Hygear Suspension has developed a coil over solution for the Yamaha Apex and Vector chassis using the single shot rear suspension. The undersized stock 1.5 float shock is replaced with a much larger 2.0 Fox Coil platform that is built using Hygear Suspension’s custom...

So after rebuilding my sled after 3 years of it breaking (see my long list of threads on here if you want a good story) I found out that I may need new pistons. In a previous post I mentioned I did a compression test which came back 30, 30, 120, 30. Then used a bore scope to check if the valves...

Just finished installing a Camso Ice Attak XT (pre studded), 1.2 lug on a 2013 Vector LTX. The skid isn't installed yet, so the track is sitting on the drive sprockets only by weight, but I find the the web between the lugs, in line with the clips rubs against the front tunnel tubing, about 2mm...

I know there are a few threads on this but there is not much info. I got a SideWinder this year and kept my 07 Attak GT. Its so nice to be able to pack on the tunnel I want to ditch the dual outlet muffler, extend the tunnel, and put a rack and seat jack back there. With the exhaust out of...

Away on a trip....my y pipe cracked at the flange...so its basically a straight pipe. Can i finish my trip like this or will it hurt the engine

How many bushings is there in the rear suspension, I'm reading 8, but i only know where four are located....the 4 big ones that go on each side where skid mounts. Also, My rear arm that mounts to skid, i can pull it side to side a little bit by hand is this normal? Or mean its time for new...

Does anyone know where a guy could buy brush re-build kit for a apex starter

I searched and there are several old threads on this topic but I am looking for fresh info. We have 2 different Apexes in our stable that need new tracks. I have a 1.6 Ice Cobra on my Winder and so far I really like it but I think the others are interested in sticking with traditional studs...

Which way should a starter turn for one of these four stroke motors clockwise or counter clockwise? I;m wondering if my starter is spinning backwards

Hello, my sled would not start today just made clicking noise. I removed the starter relay to inspect and clean. The top of the starter realy(part that holds fuses) will come off the starter relay. Are they supposed to come apart like this?

Hey guys. First time Apex owner. Can;t find much info on what I'm looking for. I blew the 2 inner wheels in front of the axel wheels. Can i easily put 2 new ones on or does the suspension need to be dropped? The 2 upper boggie wheels look like the bolt to the tunnel, I'm assuming loosen track...

I bought a 2011 Apex XTX two days ago. 2900 miles, sled is mint. Went to start it up tonight in my garage and it won't fire. Can hear fuel pump, rolls over but will not start. Any ideas??

hey guys, so been looking a lot and finding a lot of information but not finding just what i'm looking for. I am buying a 2006 RS Nytro and from what i have herd the suspension is the same as a 2007 Apex RTX, i would like to make it a 151 or 153 but don't think it is going to plausible with my...

how is going guys, buying a 2006 nytro off my dad, the starter was gone and he brought it to a shop who was suppose to change it but said the motor was low on compression and started taking it apart when they weren't supposed to. so now the motor is sitting in boxes and i want to buy it to make...

So I had my skid out last season and did a bunch of work and when I put it back in the front right bolt tightens up to the metal but then just spins and doesn't actually torque down.. tried running it anyway and every 10 minutes of hard riding I was tightening the bolt back up by hand with a...

Hello everyone, I bought an 06 Yamaha Apex a few days ago, initially when I went to go see it he tried to start it for me, took him a few minutes but he eventually got it going once he gave it throttle. (it had been sitting since february) He said the only thing it needed was new exhaust...

Hey there anyone know the best way to attack changing a steering column on 07 apex turbo . Quick look I think removing the gas tank is the best way. Any tips or tricks ?

Took my apex mcypress turbo 270 hp 12 psi. For an oil change dealer didnt tighten oil drain plug one ride went Good next ride bolt fell out drained oil . Stalled towed it back ... They put new oil in it said they looked it over all good.. Next day try and ride turbo is blown.. Took it back...

Hi everyone here is my situation I am depressed. Took my apex mxc 270 10 or 12 psi for an oil change it ran perfect . They didn't tighten the oil reservoir drain bolt. One ride good second fell out right away drained all the oil out and then oil light and shut down went to limp mode towed it...