06_apex
Veteran
hey guys the rear of my sled feels loose when I drive it.. it slides in the corners when I let off and fishtails with lots of spin.. I have my transfer rod set to wheelie mode so that is the most transfer I can put to the back of the sled correct? I have my front shocks loose as the can go and then tightened 2 turns but still a little bit to much ski pressure. My track is a 1 1/4 ripsaw with 144 studs and up front I have 6 inch duels under the skis.
What can I do to get more traction to the back and what setup works best for you. my sled is an apex er.
thanks guys.
What can I do to get more traction to the back and what setup works best for you. my sled is an apex er.
thanks guys.
Whats the limiter strap position? Sucked too far up will produce a lot of ski pressure.
06_apex
Veteran
Im not sure what position it is in now. I assume I have to loosen it a hole and see what it does
Check it out. Trying going one hole lower. This will take some pressure away from the skis and back into the skid.
