2022 Preorder build dates/delivery dates

[NYTurbo]

I agree with you 100%. The first year on my sidewinder I know for a fact, 100% positive I only used reverse two times over 2300 miles. When I disassembled the chain case that spring the bushing on the sprocket was worn excessively. Last winter are used the DMC upper gear and had zero wear, I think the longer bushing distribute the load much better and so far is proving to be a solid fix.

The key to the top gear bushing is that it fits properly hence why some stock gears/bushings last 200km and others a lot more. Any rocking side to side and it self destruct. I've yet to see a good stock bushing. Has nothing to do with driveshaft finish or reverse usage.

 

[Bulldog58]

I heard from a very reliable source that 4 sleds with EPS were delivered to a dealer in VT, and one sled with EPS was delivered to another (different) dealer in VT.

I also have the LTX-GT on order and will be selling my 18 STX DX when it arrives!

 

[SnowRipper]

My dealer in the Ottawa area has given me a VIN for my 2022 SRX and tells me the sled is coming in the next week or so

 

[justinator]

Began uncrating today, my ltx and friends srx in background.

 

[jonlafon1]

Began uncrating today, my ltx and friends srx in background.View attachment 163187View attachment 163188

Hey you got all the decals on yours!!!! Congrats bud. Enjoy

 

[jonlafon1]

 

[CMR]

Began uncrating today, my ltx and friends srx in background.View attachment 163187View attachment 163188

Did yours (and the srx) show up ahead of schedule? tia!

 

[justinator]

Hey you got all the decals on yours!!!! Congrats bud. Enjoy

Haha oh man I forgot yours was missing some! But yup they are all there!

 

[justinator]

Did yours (and the srx) show up ahead of schedule? tia!

Actually a little late…..they were scheduled to ship on septmember 9 but shipped a few weeks later. They have been at the dealer a couple weeks about but they only have one guy in the shop right now so they are busy. They found a helper to go today and start uncrating a few sleds.

 

[VX1R]

I just ran across this pic on the Port Yamaha FB page of a very happy new 2022 SRX owner.

I like the way this guy rolls. Check out the rear of his trailer

 

[Yamascotty]

So.....
You fortunate enough to have gotten your new Winders please tell us about what carbide wear bars comes on them and maybe a pic
Thanks
Scott

 

[jonlafon1]

So.....
You fortunate enough to have gotten your new Winders please tell us about what carbide wear bars comes on them and maybe a pic
Thanks
Scot

They are the 4" offset ones. Pretty much useless if running studs.. Give me a few hours Ill get one up

 

[jonlafon1]

So.....
You fortunate enough to have gotten your new Winders please tell us about what carbide wear bars comes on them and maybe a pic
Thanks
Scott

 

[Yamascotty]

View attachment 163208

Thanks
Are you planning to run them at all ?

 

[jonlafon1]

Thanks
Are you planning to run them at all ?

Nope. You want them? Pm me. Make offer?