RxThunder
Expert
I am running 4" Stud boy Shaper bars on stock RX1 skies, on my second season, roughly 1500 miles or so on them, worn but still have carbide on them.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
Riceburner
Lifetime Member
- Joined
- Apr 14, 2003
- Messages
- 1,760
- Location
- N.B. Canada eh
- Country
- Canada
- Snowmobile
- SideWinder LTX 50th
Throttle Jockey said:Here are the part numbers for all 4 sizes of Woody's Carbides for the Tuner skis, These are yamaha part numbers. So you can order them at your dealer, I am pretty sure your dealer will not know these numbers yet since they are pretty new.
SMA-8JH31-01-IE------------------ HOST BAR OR WEAR BAR
SMA-8JH31-02-IE------------------2" (shown in pic)
SMA-EYV38-50---------------------4"
SMA-TYV485-00--------------------6"
These are all square bars and are way beefier then the other style Yamaha was offering. Also they are all in stock!
They sure do not look square to me.
Then u are blind. Bars are square
marq
Expert
Throttle Jockey said:Here are the part numbers for all 4 sizes of Woody's Carbides for the Tuner skis,
Thanks dude!
no problem. just figured after reading many guys wanting a bit more bite with there tuners, This should be helpful to most.
MCApex44
TY 4 Stroke Guru
- Joined
- Mar 30, 2006
- Messages
- 973
- Location
- Western New York, Chautauqua County
- Country
- USA
- Snowmobile
- 2014 Viper RTX SE (sold)
Throttle Jockey said:no problem. just figured after reading many guys wanting a bit more bite with there tuners, This should be helpful to most.
Thanks TJ!
![Div20 ;)! ;)!](/styles/default/xenforo/smilies/div20.gif)
choochooRX1
Veteran
Thank you for the numbers
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
STAIN
Lifetime Member
- Joined
- Feb 29, 2004
- Messages
- 4,271
- Location
- Vermont
- Country
- USA
- Snowmobile
- 2022 SIDEWINDER LTX GT
- LOCATION
- Vermont
Just checked my 6 inch square runners on my tuners--carbide is gone!!!
choochooRX1
Veteran
I just checked my runners 4 and 6 's and the back half is gone, worn off. Only less than 700 miles on them and no road riding.
What brand were u using
choochooRX1
Veteran
Woodys from yamaha
Seen no issues here. But my 1st few sets of non Woodys carbides wore out pretty quick.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
STAIN
Lifetime Member
- Joined
- Feb 29, 2004
- Messages
- 4,271
- Location
- Vermont
- Country
- USA
- Snowmobile
- 2022 SIDEWINDER LTX GT
- LOCATION
- Vermont
Yamaha carbides--wonder if there is any way to get them covered??????????
Yamaha carbides--wonder if there is any way to get them covered??????????
Yeah just like the way they cover the slides!![Jump :jump: :jump:](/styles/default/xenforo/smilies/jump.gif)
Yeah just like the way they cover the slides!
![Jump :jump: :jump:](/styles/default/xenforo/smilies/jump.gif)
yamadog1
TY 4 Stroke Junkie
carbides
yamaha 2" are round and much smaller than woody's and i'm not sure if you can get 2" from woody's, i have new woody's 6" AND 4" for sale. make me a offer. pm
yamaha 2" are round and much smaller than woody's and i'm not sure if you can get 2" from woody's, i have new woody's 6" AND 4" for sale. make me a offer. pm
Similar threads
- Replies
- 21
- Views
- 5K
- Replies
- 33
- Views
- 5K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.