EPS results?

[Mad Russian]

If you put a agressive carebide, or an aftermarket skis the power steering does almost nothing. I got usi skis and my buddy had the simmons and it felt like we were trying ti turn a semi truck. power steering only works great with the stock skis and stock 4 in carbide. The problem is with the stock set up it just pushes way to hard. Just my own expireince!

 

[Turk]

I dunno about that. I am running usi vx301 with 8" stud boy shaper bars & it turns pretty easy.

 

[Mad Russian]

Well its fine if im going over 30 mph. At slow speeds is weare we were bouth having the problem. I cant see both of us having bad power steering units.

 

[Rick27]

I run simmons Gen 1 with 6 inch carbides and one hole up on the limiter and it steers pretty easy.

 

[RollRite]

I run double 4" slimjims and it steers easy at high and slow speeds.

 

[BlueApexXTX]

I am running Powder pro skis with 9.5 inch carbides.The sled handles and steers great in all conditions.No darting an steers easy.Great combination.

 

[Mad Russian]

Well maybe i have a problem then. Hmmmmm ?!

 

[studdog]

An advantage of the EPS should be that you can run a more aggressive wearbar for high speed handling and still have easy slower speed steering. Before EPS we had to have a compromise of high and slow speed front traction. Am I wrong about this?

 

[Rick27]

An advantage of the EPS should be that you can run a more aggressive wearbar for high speed handling and still have easy slower speed steering. Before EPS we had to have a compromise of high and slow speed front traction. Am I wrong about this?

You are correct!

 

[Terminator]

I run simmons Gen 1 with 6 inch carbides and one hole up on the limiter and it steers pretty easy.

X2