I bent my spindle today , not much but a bit , I know some guys did the same thing and fixed it . I have searched but didnt find anything.
What did you guys do to fix it .?
Thanks
Gerry
What did you guys do to fix it .?
Thanks
Gerry
Indy
TY 4 Stroke God
not to be a smarta$$, but replace it.
jtssrx
Lifetime Member
Indy: I agree 100%. I wouldn/t want to be riding it if it failed
AIRWOLF
Guest
I bent the spindle and cracked the
steering knuckle !
anybody have a left side steering knuckle and spindle for sale
steering knuckle !
anybody have a left side steering knuckle and spindle for sale
No problem with the comment indy , I will replace it but I am going away on Wed and cant do it before I go .
I have read that a few people did straighten it . Nothing is cracked .
I need a left one too and this is my post airworf .
JK , maybe we can firnd two
Ger
I have read that a few people did straighten it . Nothing is cracked .
I need a left one too and this is my post airworf .
JK , maybe we can firnd two
Ger
HemiOrange
Veteran
Right now there are three spindles on ebay Item number: 7131427961
Looks like he wants $5 a piece. Not sure if they are the right ones. Location is Carlsbad Springs, Ontario. Temporary solution might be a torch and a malet but not very safe in my opinion.
Looks like he wants $5 a piece. Not sure if they are the right ones. Location is Carlsbad Springs, Ontario. Temporary solution might be a torch and a malet but not very safe in my opinion.
AIRWOLF
Guest
are you telling me to get my own post?
:ORC :ORC :ORC :ORC :ORC :ORC :ORC
:ORC :ORC :ORC :ORC :ORC :ORC :ORC
No I was just pulling your leg , sorry I was joking .
I will let you know if I find some though
I will let you know if I find some though
Gilbey
Expert
Lift the front end slightly so that it pulls the skis in the air a little bit. Pull out the A Arm bolts, it's pretty easy.
Spindle cost me around 300 if I remember right. I actually bent mine enough last year where I couldn't turn right.
Spindle cost me around 300 if I remember right. I actually bent mine enough last year where I couldn't turn right.
Sorry for the confusion on this post , I am going to change it but what I needed to know is some guys repaired the bent one . I dont know if they heated it , or just pressed it or banged it back straight . I do know how to change it , I just dont have time before I go away this week.
Sorry for any confusion.
Retail for the part in Canada is $255 (+tax of course)
Ger
Sorry for any confusion.
Retail for the part in Canada is $255 (+tax of course)
Ger
Pinball Wizzard
Pro
If you are talking about the spindle and not the knuckle I Put mine in a press and straightened it. My knuckle was bent also drove a piece of pipe throuth it and that worked good enough,until back ordered parts came in.
Make sure you check a-arms and bolts that hold a-arms on they were bent also.
Make sure you check a-arms and bolts that hold a-arms on they were bent also.
Freak
TY 4 Stroke Junkie
I have two perfect stock spindles for sale if anyone needs one or two. Best offer?
I need the left one , send me a pic just to be sure we are talking about the same thing here and email a $$ fugure too .
laurien@netcom.ca
Needs to be the 03 rx also
Thanks
laurien@netcom.ca
Needs to be the 03 rx also
Thanks
Freak
TY 4 Stroke Junkie
Similar threads
- Replies
- 116
- Views
- 46K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.