How do i clean the airbox?

yamahas

Staff member
Tech Advisor
Joined
Nov 1, 2009
Messages
3,564
Reaction score
88
Points
1,483
Location
Winnipeg, Manitoba
Country
Canada
Snowmobile
2009 Phazer RTX
I decided to take the cover off my airbox to wipe it down cause it was dirty when i realized that there was some oil in the foam. There was not enougih to soak through to the other side but it was oily. That is the best way to clan out the foam and some of the plastic in the airbox?

Thanks
 
I've been meaning to clean my airbox foam as well. However, after moving the tabs that holds the foam in, I couldn't get plastic piece that holds in the foam out of the front of the airbox. What's the trick? Sorry to hijack your thread Yamahas, but I figured I'd ask incase you run into the same issue.
 
please do ask more question mo more info the better
 
I also tried taking the filter out to clean it and I think you have to take the headlight unit out to do so.
I simply wiped it with a rag and figured I would take the whole front appart during the off season.
 
I had the airbox out when I was trying to remove the plastic piece that holds in the foam and I still couldn't get it out. The only way I could see is that it has to come out the top of the airbox? Anybody have the solution for us?
 
Does the plastic piece come completely out of the airbox or do you just lift it up and remove the foam from the underneath?
 
It does come out with a little persuasion /slight bending.Taking the cover seal off helps a little.But just taking the foam out is all that really needs to be done.Clean the foam with gas and put it back in dry.Take a good look at the tabs that hold the screen on.There was a bulletin on those falling out and getting sucked in motor.Supposed to be washers on bottom of the rivets holding tab on.Part of snow update I believe.Paper towels suck up any oil in there.Little oil doesnt hurt since it catches some dust before going in motor.
 
So would you want to clean it and then hit it with a light spray of Maxima FFT (foam filter treatment) or other offroad air filter oil?
 
so i would just pour gas on it? do i even need to clean it since there wasent even enough oil to reach the other side of the filter?
 


Back
Top