PaulyTyrio
Newbie
My wife has a 2012 Yamaha Vector .
I just replaced the battery and it starts just fine. However, the guages do not work at all.
I checked all fuses. They are good. All lights are working as well.
Is there anything else I can check before replacing the instrument cluster?
I just replaced the battery and it starts just fine. However, the guages do not work at all.
I checked all fuses. They are good. All lights are working as well.
Is there anything else I can check before replacing the instrument cluster?
- Joined
- Apr 13, 2003
- Messages
- 21,323
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
My wife has a 2012 Yamaha Vector .
I just replaced the battery and it starts just fine. However, the guages do not work at all.
I checked all fuses. They are good. All lights are working as well.
Is there anything else I can check before replacing the instrument cluster?
Did you check the connection on the back of the gauge ?
PaulyTyrio
Newbie
Yes. It have slight corrosion on 2 out 10 pins. I cleaned it and applied dielectric grease. I checked all connections on that wire harness.Did you check the connection on the back of the gauge ?
- Joined
- Apr 13, 2003
- Messages
- 21,323
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
Yes. It have slight corrosion on 2 out 10 pins. I cleaned it and applied dielectric grease. I checked all connections on that wire harness.
good news? Back in business?
Do yourself a favor. Remove the connector again and flush out the die-electric grease. This grease insulates the electrical from make proper contact. Found out the hard way. I know use the Farmer's fix which is just ordinary gun grease in my electrical connections.Yes. It have slight corrosion on 2 out 10 pins. I cleaned it and applied dielectric grease. I checked all connections on that wire harness.
- Joined
- Jun 1, 2004
- Messages
- 7,696
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
i use a product called pendilube on all my connectors every year. working great for me. was made for led light corrosion issues on transports.