Meth install pics

I guess the way the weather been in manitoba it might be sitting for a while till we get some snow. Please let us know how it goes!!

Otter
 
I can get 114 just over the us border(1hour) at $7 a gallon so i am gonna crank off the meth & use better fuel.
 
turk- how's the sled? i hope you are enjoying it! what is your experience with meth? i have a xr 1200 too and a powerderlites kit just wondering how beneficial the meth is for trail riding?
any help would be appreciated.

thanks Kevin
 
Sanchez
this is your old sled i bought from you. Meth is da bomb!!!
You had a serious fuel leak & i was lucky sled never burned to the ground but it was ripped apart right away anyway.
Anyway..call Dave at hurricane & order his meth kit. 16 pounds boost on 91 octane with stock compression & bigger turbo works for me!
 
X2 on what Turk says, I run 16-22 lbs on 93 pump with Hurricane's Meth kit.
 
looking for the info on the meth kit's dependability and amount of meth used per tank of fuel...
 
A few seasons in mine and my friend's turbo sleds, no problems. Meth consumption is less than 2 quarters pr tank of fuel. I run 2 stock meth tanks for a total of 4 quarters - 1 Gallon. I run the Failsafe unit and boost controller bypass to drop boost level to wastegate base setting if the meth flow drops under a set ml/sec at 100% pump capacity, I have the failsafe unit set at 160-170 ml/sec.
 
I wish I could wrap my mind around the failsafe...but since I didnt install the unit my knowledge is pretty limited..

two quarts per tank...is that with a number two nozzle...?

I imagine since you are running a much higher boost you would use more?
 
I run 4 nozzles like Turk does.
 
What the heck is a quarter of meth. Whats that in Litres or gallons. I have Hurricanes meth kit too but scared to run it. How do I know that its working Should I have an egt installed so I can watch temps or what.
 
fullthrottle800 said:
What the heck is a quarter of meth. Whats that in Litres or gallons. I have Hurricanes meth kit too but scared to run it. How do I know that its working Should I have an egt installed so I can watch temps or what.


pull the hose to the controller and plug.....pull the nozzles...add air to controller like around 10lbs...with power the pumps should active and nozzles spray..
 


Back
Top