srxrob
Veteran
Does anybody have the instructions for snowtrackers installation? I seem to have misplaced them after unpacking them last week......I blame the kids...lol
Specifically the drilling the ski part. I found the general ones they have on their site but not the yammi specific ones.
Thanks
Specifically the drilling the ski part. I found the general ones they have on their site but not the yammi specific ones.
Thanks
dice_jay
Veteran
I just installed them on my 2011 Apex
no need for the instructions, they suck anyway. Find center of the front hole from your original carbides (the one the threaded rod comes through, not the guide) and go 5" inches forward. Drill straight through with a 1/2 inch drill. Once through, tip the drill back to 60 degrees to match the angle the lead on the snowtracker needs to clear.
no need for the instructions, they suck anyway. Find center of the front hole from your original carbides (the one the threaded rod comes through, not the guide) and go 5" inches forward. Drill straight through with a 1/2 inch drill. Once through, tip the drill back to 60 degrees to match the angle the lead on the snowtracker needs to clear.
srxrob
Veteran
Thanks man, thats what i was looking for. i assume the distance on the 06 skis is the same?
Similar threads
- Replies
- 12
- Views
- 2K
- Replies
- 2
- Views
- 2K
- Replies
- 4
- Views
- 2K
- Replies
- 2
- Views
- 818