monsterattak
Pro
sweet pics guys.... i am with craze 1 wondering how that track fit and what is it....
Bodacious
TY 4 Stroke Junkie
It's a new leftover non-current Yamaha/Camoplast 1.5". I looked high and low for a fully punched 1.5" so that I could run the drivers I wanted to. Nothing "current" available, as far as I could find. I did take out the protectors.... if this set-up doesn't suit me this chassis will become a 151" this winter. Thanks!! Bocraze1cars said:
craze1cars
VIP Member
Good info Bodacious....thank you! The fact that it's a non-current explains why I couldn't find one for myself.
Brian
Extreme
Hey monsterattak,
All the mods look great!
Did you do the BB spring and revalving yourself or have it done? If you had it done would you tell me where? I have my skid out now and want to get it done (at least the BB spring). I'm just around the corner from you so I am hoping for someplace local.
Did you buy the Rox stuff locally?
Thanks,
Brian
All the mods look great!
Did you do the BB spring and revalving yourself or have it done? If you had it done would you tell me where? I have my skid out now and want to get it done (at least the BB spring). I'm just around the corner from you so I am hoping for someplace local.
Did you buy the Rox stuff locally?
Thanks,
Brian
Apsterbobed
Extreme
hey monsterattak, i put that same stud setup in my attak last winter. i have about 200 to 300 miles on the studs and they have just about eaten the whole plate that protects the exaust in the ceter of the tunnel, i got the sled back from the dealer after the break in service and the studs installed and we took one last trip last winter, so i dont think its from the track not being tight. just letting you know what happed to my sled. just droped the skid out tonight and found the damage, not sure what im gonna do to prevent any more problems...
jcrowton
Veteran
heres my apex gt aka Black Knight
Plenty of mods, 8" total rise with 6"bar and 2" pivot, powermadd handguards, skid plates, 144 studs, hauck pipes, sounds like my bike, heavy duty rear spring, called Blakc Knight custom paint, ive painted 6 sleds, will do any types of graphics, more pics just ask, lets get ready to ride
Plenty of mods, 8" total rise with 6"bar and 2" pivot, powermadd handguards, skid plates, 144 studs, hauck pipes, sounds like my bike, heavy duty rear spring, called Blakc Knight custom paint, ive painted 6 sleds, will do any types of graphics, more pics just ask, lets get ready to ride
Attachments
monsterattak
Pro
Apsterbobed said:
I will be very shocked if I have issues..it seems to me that the 1.325 studs are what most everyone is running and I took the reccomendation straight from woody's....the studs barely stick above the track and with the aluminum protectors being about 7/8" thick I just can't see how they would ever contact the exhaust shield...
welterracer
TY 4 Stroke God
Track was too loose.. (or streched) THats why they hit..
Ive had mine hit just a few times.. and after i tightened the track to spec it didnt happen again
Ive had mine hit just a few times.. and after i tightened the track to spec it didnt happen again
Apsterbobed
Extreme
im hoping that the dealer didnt have the track right, but i think because they did it last year they are not going to be able to do much for me, hopefully i can get it right this year...
What Welterracer said.
This year, I will be running 1" track so I don't thing it will be an issue again. You have to keep the track nice and tight - 1 3/4" to 2" spacing with 20 lbs weight.
This year, I will be running 1" track so I don't thing it will be an issue again. You have to keep the track nice and tight - 1 3/4" to 2" spacing with 20 lbs weight.
Apsterbobed
Extreme
i will be keeping an eye on it this year. just pisses me off that i get it back from my dealer and they didnt tighten it enough
Moose Magnet
Newbie
craze1cars said:All right, you motivated me...still has the original windshield on it as my midheight tint didn't fit as well as I hoped. Mentioned it to the dealer and he tells me there's some new windshield options coming out for these sleds in the next month, so I might wait to exchange this one until I see what else he gets in...
But heres some pics. A quick rundown of what's been done so far:
Slydog Powderhounds
8" Bergstrom Triple points
Bergstrom Ski Savers
Rich Motorsports A-arm protectors (slightly used, that's why they're pre-scratched! Again, cosemtics are quite meaningless to me.)
Camoplast Intense 1.5" track
SLP wear pads
Goodwin belt deflection adjuster
Yamaha skidplate
My own custom cheap-o mirrors
Diluted the antifreeze to proper mix (here's a little something for you dummies at the Yami factory)
Optimate battery charger leads installed (dealer did this for free, nice guys at Highland Yamaha)
Still to come:
Windshield
Garmin Etrex Legend CX GPS mounted to dash
Yamaha knee pads/tank protectors (backordered)
Yamaha front underhood bag (backordered)
But this dog is pretty much ready for some SNOW!!!!!
Check this first picture....now doesn't the underside of this front end just look smooth as a baby's bottom? That's GOTTA carve snow better than all those metal bars and hardware being exposed, dontchathink?
When did u pick up your attak? Mine still hasn't come in yet.
would have been longer but it was spitting raw fuel out of the pipe and it didnt feel to great in the eyes
http://www.youtube.com/watch?v=52-eTzmaRfM
http://www.youtube.com/watch?v=52-eTzmaRfM
Dano
TY 4 Stroke Master
Hey Matt, so when is the true show and tell date for your sled? I was at the show yesterday when John pointed to your sled. I could not believe my eyes nor recognize anything from last year!! Your gonna have so much fun! 
I’m counting my pennies as we speak for a radical make over as well. Not going to be extreme, but different.
Dan
I’m counting my pennies as we speak for a radical make over as well. Not going to be extreme, but different.
Dan
hey Dan,
hahah ya there really isnt much left of last years Apex
it was suppose to be done for the show but the painter dropped the ball so I guess it was covered with a blanket during the day. The panels made it late last night after hours and they are now installed but I have yet to see them...lots of people calling me to tell me they are looking at it and I'm sitting here working and have no clue how the paint turned out!
hahah ya there really isnt much left of last years Apex
it was suppose to be done for the show but the painter dropped the ball so I guess it was covered with a blanket during the day. The panels made it late last night after hours and they are now installed but I have yet to see them...lots of people calling me to tell me they are looking at it and I'm sitting here working and have no clue how the paint turned out!