Stage 6 build

[DMCTurbo]

Figured I'd give these bearings a try on the Shafts that aren't easy to get at with the suspension in the sled.

 

[DMCTurbo]

Ready to rock n roll

 

[jonlafon1]

Figured I'd give these bearings a try on the Shafts that aren't easy to get at with the suspension in the sled.View attachment 163122

How much are those? Your running that on the drive shaft correct?

 

[DMCTurbo]

How much are those? Your running that on the drive shaft correct?

Running them on the rear skid, 2 inners on the J&T axle and the 2 inner idlers on the shaft that the rear shock mounts too. I figured I'd try them on those as they aren't removable while the skid is in (easily anyway). They roll real nice.

 

[jonlafon1]

Running them on the rear skid, 2 inners on the J&T axle and the 2 inner idlers on the shaft that the rear shock mounts too. I figured I'd try them on those as they aren't removable while the skid is in (easily anyway). They roll real nice.

Got it. Not the drive shaft.

 

[DMCTurbo]

I wanted to get my hands out of the wind a little better for the radar running days so I picked up this 4-6" adjustable powermadd riser.

 

[2004yamahaviper]

I wanted to get my hands out of the wind a little better for the radar running days so I picked up this 4-6" adjustable powermadd riser.

View attachment 163513View attachment 163514View attachment 163515

I ran the same riser last year. I actually prefer the lower height trail riding.

 

[Motorhead]

I wanted to get my hands out of the wind a little better for the radar running days so I picked up this 4-6" adjustable powermadd riser.

View attachment 163513View attachment 163514View attachment 163515

Both good and fast looking! Nice and low and ready for some ice!

 

[DMCTurbo]

I'll be shaking her down Saturday!! We have a lake ready to run on.

 

[cornet rt]

I'll be shaking her down Saturday!! We have a lake ready to run on.

 

[cornet rt]

Good ol mud lake

 

[74Nitro]

Go get'em.

 

[1nc 2000]

138mph?

 

[DMCTurbo]

138mph?

Yes 138mph today. My plan was to take it easy today but that only lasted 10 minutes. Lots more in it.

 

[DMCTurbo]