Watch turbo bolt

[BlueByYou2000]

Not finding anything larger than .65 OD on Fastenals website. So I said screw it. Ordered the ones Cannondale posted. Thanks for the link and info.

 

[actionjack]

I got those in post #68
Stainless steel. 3/8" 0.410" 0.830" 0.090"-0.110" Rockwell C46 10 91074A[4]31 10.06

I was waiting for an appointment with them in a web cart at McMaster when I started calling. No at 2 Fastenal locations, yes at this obscure machine shop supply - great find! Full of catalogs and dusty old displays.

 

[MrSled]

Not finding anything larger than .65 OD on Fastenals website. So I said screw it. Ordered the ones Cannondale posted. Thanks for the link and info.

I have some at my shop if you need a few.

 

[cannondale27]

I have some at my shop if you need a few.

You can have mine also. Nos Pro never got them to try.

 

[dsimonRX1]

My bolt was tight and it's easy to get at with the Turbo Force exhaust installed. I have 145 miles on so far.

 

[Doc Harley]

Fastenal by me said they have the 3/8th. Inside measures 10.something ,Will that work?

 

[BlueByYou2000]

Like others have said, make sure the OD is .82 or so. The ones I got at fastenal are pretty narrow. They were .53 OD. I just ordered the ones Cannondale posted on page 5 of this thread

 

[gtrdan24]

Has a recall or service bulletin been issued?

NOT YET IVE BEEN CHECKING DAILY

 

[actionjack]

The part number and specs are right there in this page. .410 ID .83 OD.

 

[actionjack]

if you remember my post on this in the past...I describe taking the torx bit out of the sckeet and putting into the box end of a combination wrench...in my description...there is no sacrificing of the tool though...

I couldn't get the bid out. I broke the bolt free with vice grips easily and I'm going to replace with hex head.

 

[monte1214]

LTX-SE with 240kms - 2 missing bolts and the 3rd was finger tight.
It's at the Dealer now, and he says they're expecting the TSB tomorrow.

 

[kylechargerrt]

347 miles never checked bolts. Checked them tonight all are tight LTX LE

Sent from my SM-G920W8 using Tapatalk

 

[rlbock]

100 miles and two bolts are loose haven't got to third yet, heat shield is cracked. Need a ball end torx bit, never seen a ball end torx.


Sent from my iPhone using Tapatalk

 

[bleedyamaha]

I used a regul

100 miles and two bolts are loose haven't got to third yet, heat shield is cracked. Need a ball end torx bit, never seen a ball end torx.


Sent from my iPhone using Tapatalk

why you need a Torx bit the turbo bolts that are loose are 13mm the 6 exhaust bolts need a t50 torx. I didn't use a ball end just a regular torx.

 

[actionjack]

100 miles and two bolts are loose haven't got to third yet, heat shield is cracked. Need a ball end torx bit, never seen a ball end torx.


Sent from my iPhone using Tapatalk

Cat sells them. I heard Ulmer or Excell has them. Get a T50 socket and punch the Torx out out then use an adjustable to turn the bit.