track

2023 MTX 153” with 270 kit. After 1200 brutal kms my 3" Powerclaw is ready to be swapped out. I'm posting this poll, but also hoping for lots of feedback on different tracks. Do the paddles flex, does the track trench, is it sturdy, how is the grip, half or full clipped, how much does weight...

New user to the forum. My boss recently purchased a used Phazer Mountain Lite with the 144x14x2 2.52 track. Seems these tracks are difficult to find online. Is there a source used to get these or can we use a 144x15x2 2.52 without cutting it? Again we are both newbies to snowmobiles and...

I'm a little over 7000 miles on mine, I have one pull thru due to stud pattern utilizing a combo of double and singles. When/if I install a new track it will be all doubles, other than the single pull thru it looks pretty good overall. Am I pushing this old track too far? new track and studs...

is there a high notch track for apex mountain rx10mw?

hello, is the belt to be changed? and the assy track? Post photo at link: https://drive.google.com/drive/folders/1S5i6njU47ZHq5ShlCFNxagcM4fBleF5h

Looking around for a new track for my 2012 RTX it looks like all of the 14" 121 options are discontinued. Except for maybe Camso 9027H which is still on the website but seems out of stock everywhere. Now that we seem to be in a post-phazer world, what's everyone using for tracks? I should...

Hi. gonna be putting a new track on my 15 mtx 162 this summer. looking for recommendations. I primarily ride in bc and obviously deeper the better. Sled is turboed 190hp. Was either thinking the camso conquer 280. But also interested in a 3” track Any recommendations would be great. Thanks.

Any opinions on the Composit mountain tracks M66/M67 or M770? I need something as durable as the PowerClaw 3", and preferably 3" lugs.

My wifes phazer Mtn undercarriage broke, I have opportunity to buy used Venture Lite undercarriage just rebuilt with new studded track. I was thinking to swap in the Venture Lite undercarriage and track to create a light weight trail machine. We run in a lot of low snow conditions and the Mtn...

I researching a track replacement on my 2012 Yamaha RS Venture (RST90). It's the original OEM 15 x 144 x 1.25 Camoplast Rip Saw Two-Ply track. I was thinking about a Camso with the embedded studs in the lugs. However, what I see is only a single-ply track. Am I okay with the single-ply or does...

Has anybody had experience with these tracks? I bought a Talon 32 after reading good reviews on them. I must say it’s a heavy duty looking track. The lugs are very thick and the clips are unbelievably thick! It looks to be high quality, very little rubber flash, no cords hanging out. It has a...

Greetings! One thing I am realizing is, that while snowmobiling in my home state, more often then not I am in loose powder on the Forestry Roads, and most times Very Deep ... Not a bad thing , but I am thinking I may have to change my setup some... This year I went with a Wider Ski, opting...

I am considering adding 60 flat clips to my 129 track on my SR Viper. Currently have 90 studs down the middle. Are there any benefits to fully clipped vs stock?

I need to replace the track on my wife’s viper xtx 141. It has a cobra track on it now and I really don’t like it. What are people running on there xtxs I notice there’s not many options on the 141s.

I was wondering if anyone would be willing to assist me in swapping my track. With all of the posts, pictures and manuals I am fairly confident I could do it on my own taking pictures along the way but would feel much more comfortable if someone would be willing hang out and be there to make...

hi guys. Im new here and i tried to find my answer but didnt find anything. I got 2 good deal for a new track and im not sure avout the fitement. So i have a 06 mtx with a 16x162x2.25 and i would like to know if any of these 2 track will fit. The first one is a 15x163.2.5 (challenger extrem)...

I have a Sidewinder LTX LE with the 137 track coming this fall. The stock track is a 1.25 inch lug. 1.25 can't be long enough for 200h.p. I am trying to decide whether to stud it or swap for an aftermarket Camoplast. I think there is a 1.6 lug with studs inserted in the lugs. Looking for...

My 2012 Vector now has over 8000 miles on it. Noticed after the last trip that most track clips are compromised or missing. So I can buy clips for about $130.00 and hopefully borrow the tool to rebuild the track that might have 2000-4000 miles of life left, or replace the track for more like...

I just changed the track in my 08 apex....changed the speedo,chain case and jack shaft bearings while in there. Put track back on and suspension back in but cant get the track to align? I can get it to around 1/2 inch ssag on both sides but I'm just over quater inch from clip to slide on one...

The rear suspension travels between two white plastic stops. Our sled at rest would sit about 1/2 way between the stops. We could only get it to rise to the highest position by lifting the rear of the sled. We replaced the two springs and many other parts. We also had the rear shock rebuilt...