• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

2019 SRX

Team Tonka

Newbie
Joined
Dec 27, 2018
Messages
7
Age
74
Location
Minnesota
Country
USA
Snowmobile
2019 srx
I’m new to this site and see some familiar names from my turbo cat days. I had a 2012 Cat with 250 trail tune and 330 race tune. I won’t get into all the problems I had, almost to many to list.
What I’m wondering is, do I need do any modifications to the 2019 SRX for reliability. The sled will be aggressively ridden, 245 tune, heavily studded or chisels, 280# rider.
Thanks in advance.
 

Gonna run that against all the Tonka 850’s this year? Should be a bloodbath. Lol
 
I have tried to cover all the potential issues with these sleds, all in order from day 1 in my build thread, lots of pics and info. Page 1 of my thread has quick links easily laid out to jump you to any item in the thread.

Link to my thread is always in my Sig below.

Dan
 
I have tried to cover all the potential issues with these sleds, all in order from day 1 in my build thread, lots of pics and info. Page 1 of my thread has quick links easily laid out to jump you to any item in the thread.

Link to my thread is always in my Sig below.

Dan
Thanks Dan, I remember you from the cat turbo days.
 
IMHO gear down to cats or the ltx gearing or at least do not gear up....obviously change out clutching to match your factors...add a fourth wheel kit...
 
I think the SRX has the 4th wheel kit and the new clutch parts (Springs and helix are different) dont know how well they work yet.
1. Belly pan protector for blowing belts
2. New slides the Dupont ones are good, stock wears out in 500 miles
3. New windshield the stock one looks good but is useless
4. Either the Snow trackers or a different set of skis. The stock ones are dangerous
5. Ice Scratchers because these things seem to overheat if you stop for more than a minute and minimal snow conditions
 
Put almost 2000 miles on my 18 last year and sliders showed next to no wear at all. I've never had a machine that I had to put ice scratchers on, nor do I want to.
 
Damn you must have the best one. All three of the Winders in our group had to have them at the 500 mile service. We all replaced with the Duppont

Yep same here at about 1100 needed new so went with Duponts. Bud just bought a used 17 LTX-LE with 8-9K on it. His were original. Don’t figure huh???
 
I had some of the worst conditions to ride in last year low snow and hard as concrete they just didn't wear. no scratchers last year either.
 
I have tried to cover all the potential issues with these sleds, all in order from day 1 in my build thread, lots of pics and info. Page 1 of my thread has quick links easily laid out to jump you to any item in the thread.

Link to my thread is always in my Sig below.

Dan

Watched some of your videos today on you-tube I believe
 


Back
Top