B/O orange

[74Nitro]

300$ for Dalton Qay 70 over here now so tempting to mod the stock ones...

The RX-1 8FA loaded up work decent also and good used ones are around given that the four cylinder reduced drive is so easy on clutches. They have a nice curvature unlike many other Yamaha weights.

 

[Phatboyc]

You need a welder to load them up too or it accepts yamaha weights?

 

[74Nitro]

You need a welder to load them up too or it accepts yamaha weights?

They are two-hole weights, yes they take Yamaha rivets as they are a factory weight. I'm not sure they can do more than a stage one tune however and be heavy enough, but Hauck also make rivets that are heavier than Yamaha's rivets.

 

[Doc Harley]

300$ for Dalton Qay 70 over here now so tempting to mod the stock ones...

I hope this will help....

 

[Phatboyc]

Thanks guys! Still making sure I don't have a belt blower. Keeping this in my notes for when I'm ready to let the honey badger out of his cage.

 

[Firedawg1998]

I totally agree. At the time I didn't know anyone who had a magic load for our stock weights. I've since met someone who does. Would be alot cheaper and pretty much , since I've set mine I haven't adjusted them again.....