Bushings

[Ron W]

Anyone know how to remove the collars to get at the bushings in the spindles?

 

[turbogts22]

On one of mine I had to heat them up with a mapp gas torch to loosen the rust bond. They're suppose to slide right off but rust is mother natures Loctite.

 

[Ron W]

On one of mine I had to heat them up with a mapp gas torch to loosen the rust bond. They're suppose to slide right off but rust is mother natures Loctite.

Thanks. I'll try that. They move between the washers but seem like it's one piece

 

[karl]

On one of mine I had to heat them up with a mapp gas torch to loosen the rust bond. They're suppose to slide right off but rust is mother natures Loctite.

mine were the same, I also heated and smithed a bit with a hammer and block to expand them. still had to drive the ski axle out with a drift and hammer.