stgdz
TY 4 Stroke Junkie
- Joined
- Mar 27, 2021
- Messages
- 644
- Age
- 46
- Location
- Buffalo MN
- Country
- USA
- Snowmobile
- 19 tcat, 15 4000 RR, 13 800 RR
Don't look at the wiring harness or zip ties then.See or Notice? I noticed
Nobody is going to see it inside the chassis, you are right, my point was about the demo bulkhead in the video.
I wish cat would put more work into that part of assembly.
number1kyster
TY 4 Stroke God
C’mon, what did you expect? You can’t stamp Arctic Cat on the sled without having a Jesse James Monster Garage feel to it.See or Notice? I noticed
Nobody is going to see it inside the chassis, you are right, my point was about the demo bulkhead in the video.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
![](/styles/donate.gif)
Upstater57
Lifetime Member
- Joined
- Apr 25, 2021
- Messages
- 523
- Age
- 66
- Location
- New York
- Country
- USA
- Snowmobile
- 2022 Tcat EPS,
2014 ZR9000 (sold)
1978,1979,1980 SRX (sold)
I like it. I am sure they will use the same steering mechanism with the wider bulkhead to accommodate the 4 stroke. Of course, it is probably already designed to accept the EPS unit. As long as I have owned Arctic Cats (since 1976), they all had a farm implement "build look" to them. As long as they are fast, handle, and ride well, I am happy. The Yamahas were always a better build quality (my first SRX was a 1976) especially compared to cat. No one really talked about build quality back in the day but there was no farm implement feel to the Yamahas. Once Yamaha put its name on Arctic Cats, they joined the farm implement club. As long and they are fast, handle and ride well, I am happy.
Metallicat
TY 4 Stroke God
I found it rather interesting that they ditched the TCL, coupled design on the short track. That means no slide action front arm, as evident by the video.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
![](/styles/donate.gif)
Upstater57
Lifetime Member
- Joined
- Apr 25, 2021
- Messages
- 523
- Age
- 66
- Location
- New York
- Country
- USA
- Snowmobile
- 2022 Tcat EPS,
2014 ZR9000 (sold)
1978,1979,1980 SRX (sold)
I think the longer front arm on the 129 does a better job of "coupling" the suspension without making it a wheelie machine than the old set up.I found it rather interesting that they ditched the TCL, coupled design on the short track. That means no slide action front arm, as evident by the video.
I think the longer front arm on the 129 does a better job of "coupling" the suspension without making it a wheelie machine than the old set up.
The longer front arm allows them to have finer control over suspension travel, that's what they stole from the XC designs. It will tend to wheelie less because any torque coming from the back has to push upward through a longer lever (harder to overcome). I think they said it right, its a tradeoff between good (flat) cornering and still somewhat playful. I wonder however why the 137 didn't get this attention.
![](/styles/vip.gif)
74Nitro
VIP Member
- Joined
- Feb 18, 2013
- Messages
- 5,227
- Age
- 52
- Location
- Dublin Ontario
- Country
- Canada
- Snowmobile
- 2019 Sidewinder LTX
I am not sure why the first Catalyst didn't appear as an 850, as Cat is way overdue for a sled in that class. An 850 mountain Turbo also.The longer front arm allows them to have finer control over suspension travel, that's what they stole from the XC designs. It will tend to wheelie less because any torque coming from the back has to push upward through a longer lever (harder to overcome). I think they said it right, its a tradeoff between good (flat) cornering and still somewhat playful. I wonder however why the 137 didn't get this attention.
stgdz
TY 4 Stroke Junkie
- Joined
- Mar 27, 2021
- Messages
- 644
- Age
- 46
- Location
- Buffalo MN
- Country
- USA
- Snowmobile
- 19 tcat, 15 4000 RR, 13 800 RR
I heard it was all ready but some one pulled back at the last moment. Likely coming next year and with the new gauge.I am not sure why the first Catalyst didn't appear as an 850, as Cat is way overdue for a sled in that class. An 850 mountain Turbo also.
After that they will probably release the 400cc blast powered cvt snowbike and clean up that market.
pdiddy
TY 4 Stroke Junkie
- Joined
- Oct 12, 2004
- Messages
- 517
- Location
- Southern Maine
- Country
- USA
- Snowmobile
- '11 Apex; '16 Apex XTX; '18 Indy 600 SP;
Unless Yamaha has a 4-stroke with intake and exhaust on the same side up their sleeve don't hold your breath.I like it. I am sure they will use the same steering mechanism with the wider bulkhead to accommodate the 4 stroke.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
![](/styles/donate.gif)
Upstater57
Lifetime Member
- Joined
- Apr 25, 2021
- Messages
- 523
- Age
- 66
- Location
- New York
- Country
- USA
- Snowmobile
- 2022 Tcat EPS,
2014 ZR9000 (sold)
1978,1979,1980 SRX (sold)
Good point. It's always good to copy what works. They all use cats arm configuration. LOLThe longer front arm allows them to have finer control over suspension travel, that's what they stole from the XC designs. It will tend to wheelie less because any torque coming from the back has to push upward through a longer lever (harder to overcome). I think they said it right, its a tradeoff between good (flat) cornering and still somewhat playful. I wonder however why the 137 didn't get this attention.
When I have looked at "patent" diagrams that were posted in the past, I thought they would be reinventing their skid frame design. Perhaps that is what's tap for the 137 in a year or two so they only made calibration adjustments for the Catalyst.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
![](/styles/donate.gif)
Upstater57
Lifetime Member
- Joined
- Apr 25, 2021
- Messages
- 523
- Age
- 66
- Location
- New York
- Country
- USA
- Snowmobile
- 2022 Tcat EPS,
2014 ZR9000 (sold)
1978,1979,1980 SRX (sold)
I think they needed to flush the 800's out of the system. That engine block don't work in the new chassis. The new 600 uses a new block. Probably the same block the 860 will use. We will also probably see two versions. One non turbo, one turbo. We will find out in about 11 months.I am not sure why the first Catalyst didn't appear as an 850, as Cat is way overdue for a sled in that class. An 850 mountain Turbo also.
stgdz
TY 4 Stroke Junkie
- Joined
- Mar 27, 2021
- Messages
- 644
- Age
- 46
- Location
- Buffalo MN
- Country
- USA
- Snowmobile
- 19 tcat, 15 4000 RR, 13 800 RR
About the only thing that is patented on rear suspensions is the rear section being patented. Polaris for external and ski Doo for internal progressive systems.Good point. It's always good to copy what works. They all use cats arm configuration. LOL
When I have looked at "patent" diagrams that were posted in the past, I thought they would be reinventing their skid frame design. Perhaps that is what's tap for the 137 in a year or two so they only made calibration adjustments for the Catalyst.
Turboflash
TY 4 Stroke God
- Joined
- Mar 18, 2019
- Messages
- 2,443
- Location
- Southern MN
- Country
- USA
- Snowmobile
- '17 ZR9000 Ltd. 137 - PEFI Stage 4
Probably a prototype welded by lowly humans? May not have had the robotic fixtures ready yet? Robotic welds will be much better.You would have thought that they would have picked a bulkhead with nicer quality welds as their demo unit.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
![](/styles/donate.gif)
Upstater57
Lifetime Member
- Joined
- Apr 25, 2021
- Messages
- 523
- Age
- 66
- Location
- New York
- Country
- USA
- Snowmobile
- 2022 Tcat EPS,
2014 ZR9000 (sold)
1978,1979,1980 SRX (sold)
Posted somewhere on this forum were drawings of cat skid frame submissions, one of which had a completely different front arm mechanism unlike anything I have ever seen. Maybe someone will be interested enough to search for it and repost it.About the only thing that is patented on rear suspensions is the rear section being patented. Polaris for external and ski Doo for internal progressive systems.
stgdz
TY 4 Stroke Junkie
- Joined
- Mar 27, 2021
- Messages
- 644
- Age
- 46
- Location
- Buffalo MN
- Country
- USA
- Snowmobile
- 19 tcat, 15 4000 RR, 13 800 RR
Posted somewhere on this forum were drawings of cat skid frame submissions, one of which had a completely different front arm mechanism unlike anything I have ever seen. Maybe someone will be interested enough to search for it and repost it.
US11319024B2 - Rear suspension system for a snowmobile - Google Patents
A snowmobile includes a chassis, at least one ski, and a skid frame that includes one or more slide rails extending longitudinally, rear idler wheels, upper idler wheels, and a rear suspension. The rear suspension may further include a flexible, composite member, a rear shock connected between...
patents.google.com
Also looks like one of the weber guys is working at arctic cat now on the ATV engines
Engine-US11578647B2
Embodiments are directed toward an engine. In some embodiments, the engine includes a water pump and a balancer shaft. In some emb...
www.patentguru.com
Wonder if cat will make a 9XX turbo twin to fit in the catalyst.
Similar threads
- Replies
- 68
- Views
- 12K
- Replies
- 5
- Views
- 1K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.