Goofy
Veteran
higher seat
I'm gussing these two guys are blowing smoke up our rear. Its been over two weeks and there has been no pics of these higher seats or some kind of response. It sounds like the perfect mod so if somebody has done this please share some Pics.
I'm gussing these two guys are blowing smoke up our rear. Its been over two weeks and there has been no pics of these higher seats or some kind of response. It sounds like the perfect mod so if somebody has done this please share some Pics.
loligager
Veteran
Seat foam
I have been off line for a couple of weeks due to work. The seat mod that I had done this past summer has worked out great. I had an upholster cut 4 inches of the soft foam out and add in a firmer foam plus 4 inches. I also added 3.5 inch Rox risers. Night and day ride for me as far as comfort is concerned. Many have sat on on it or tried it out and agree. I did post some flicks back in August. I will take some more and post them so you can check it out. Also note that the stock seat cover had plenty of material and stretch in it to cover the additional 4 inches.
I have been off line for a couple of weeks due to work. The seat mod that I had done this past summer has worked out great. I had an upholster cut 4 inches of the soft foam out and add in a firmer foam plus 4 inches. I also added 3.5 inch Rox risers. Night and day ride for me as far as comfort is concerned. Many have sat on on it or tried it out and agree. I did post some flicks back in August. I will take some more and post them so you can check it out. Also note that the stock seat cover had plenty of material and stretch in it to cover the additional 4 inches.
4Fighter
TY 4 Stroke God
Whatever mod YOU do, you will eventually spring for an aftermarket seat any way cause: a) it just doesn't look right, b) doesn't hold it's firmness or height, and c) the cover still gets wrecked - BTDT.
Don't forget, you can always sell the stock seat for half of what a new one costs, instead of paying an upholsterer to modify the seat, and then find out it isn't working for you.
This is about the best thing going right here, I should know, I'm 6' - 6" tall: Mountain Mod from Murray. BTW: The Yamaha seat & cover soaks up water like a sponge too, and you will always have that to contend with.
Don't forget, you can always sell the stock seat for half of what a new one costs, instead of paying an upholsterer to modify the seat, and then find out it isn't working for you.
This is about the best thing going right here, I should know, I'm 6' - 6" tall: Mountain Mod from Murray. BTW: The Yamaha seat & cover soaks up water like a sponge too, and you will always have that to contend with.
Attachments
loligager
Veteran
Posted: Fri Nov 28, 2008 5:38 am Post subject: Attak seat modification
Pictures are on a post dated above. I have 2000 plus miles of riding on it this year. The seat has held up extremely well. I ride standing a lot, and use my legs/boots to pinch the tunnel etc. I was worried I would wear through the seat material but so far so good. The foam has retained its firmness etc. I looked at the MT Mods and Boss. Both look nice and I understand you realize a weight savings but this worked out well for me. I wanted my seat to be more like the moto seats that I ride on. Flat or not so slanted towards the tank. I can move around well on it and transition to standing is much easier for me. Function over form for me.
Pictures are on a post dated above. I have 2000 plus miles of riding on it this year. The seat has held up extremely well. I ride standing a lot, and use my legs/boots to pinch the tunnel etc. I was worried I would wear through the seat material but so far so good. The foam has retained its firmness etc. I looked at the MT Mods and Boss. Both look nice and I understand you realize a weight savings but this worked out well for me. I wanted my seat to be more like the moto seats that I ride on. Flat or not so slanted towards the tank. I can move around well on it and transition to standing is much easier for me. Function over form for me.
4Fighter
TY 4 Stroke God
loligager said:Posted: Fri Nov 28, 2008 5:38 am Post subject: Attak seat modification
Pictures are on a post dated above. I have 2000 plus miles of riding on it this year. The seat has held up extremely well. I ride standing a lot, and use my legs/boots to pinch the tunnel etc. I was worried I would wear through the seat material but so far so good. The foam has retained its firmness etc. I looked at the MT Mods and Boss. Both look nice and I understand you realize a weight savings but this worked out well for me. I wanted my seat to be more like the moto seats that I ride on. Flat or not so slanted towards the tank. I can move around well on it and transition to standing is much easier for me. Function over form for me.
I'm glad it worked out for you. Stuffing the stock seat has it's advantages too. I like the Mt Mod - IMHO: It's worth every penny.
- Joined
- Jun 28, 2004
- Messages
- 2,436
- Age
- 64
- Location
- Clinton, Wi.
- Country
- USA
- Snowmobile
- '11 Apex XTX, '09 Venture GT, '06 Attak, 08 Nytro Hybrid
^^^^^ what he said!! I LOVE my MMOD seat. BUT, whatever works for YOU is the best mod. Too many times we get caught up in the fever of modding things. I have experimented with stock and aftermarket, and for my money, my Boss on the Viper and the MMOD on my Attak were money well spent. 4 seasons on the Viper made me realize I wasn't waiting with my Attak. The last 2 yrs.with the Boss were the MOST comfortable that sled ever was. Knew after switching to a Nytro seat that a stock seat wasn't going to cut it for me.
welterracer
TY 4 Stroke God
What does the mountain mod seat cost and how much higher is it?
yamadog1
TY 4 Stroke Junkie
seat
brian
mt. mod seats are around $625 us dollars, they are very nice seats.
i will be getting my skid parts to you but i not before your sale ends, that's nice of you to offer that to us.
thanks rick
brian
mt. mod seats are around $625 us dollars, they are very nice seats.
i will be getting my skid parts to you but i not before your sale ends, that's nice of you to offer that to us.
thanks rick
SPEED
TY 4 Stroke Junkie
SPEED
TY 4 Stroke Junkie
yamadog1
TY 4 Stroke Junkie
seat
i have had boss seats in the past, but for attak they don't do a stock
tail light like mt. mod does. i wish they would have, i would of bought one.
i have had boss seats in the past, but for attak they don't do a stock
tail light like mt. mod does. i wish they would have, i would of bought one.
CaptCaper
TY 4 Stroke God
- Joined
- Jan 1, 2007
- Messages
- 2,181
- Location
- Northern N.H.
- Country
- USA
- Snowmobile
- 2016 RS Vector XTX 1.25 Lug wifes..2013 RS Vector LTX.. 2003 600 VMax Past Machines 3-2007 Attaks 1-2010 Vector LTX.. sorry no Stinkdoos or poo's cats.
I can't believe it's $700 for a Mt Mod...It better be much better.. I'd like one but can't spring that doe for a seat.
Goofy
Veteran
Higher seat
Thank you for posting the pics guys..
Thank you for posting the pics guys..
Similar threads
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.