blueironranger
TY 4 Stroke God
- Joined
- Feb 3, 2009
- Messages
- 2,002
- Age
- 45
- Location
- Iron Range MN
- Country
- USA
- Snowmobile
- 2014 Viper XTX
2009 Phazer MTX
I'm assuming the YXZ1000 engine shows up in a sled this year also, @110hp it really fills in a gap in the line, a true "600" class midrange engine. From a bit of searching that engine looks to make peak HP at 8200rpm and has a really flat/fat torque band. Not sure if its too close to the Viper engine though in size though and they may not use it due to economics. @ 110hp engine would also allow for a new 60-70hp class engine and bump the Phazer engine out or allow them to retool the phazer engine with cheaper components since it makes 65-70HP at 8000 rpm which would allow them to ditch the gear reduction an use cheaper rods/crank/piston combo with a 3000rpm reduction in redline RPM. I'm also wondering with all the meetings in Georgia that they might be moving sled production to the ATV plant.
gytr done
Expert
- Joined
- Jan 8, 2015
- Messages
- 446
- Age
- 54
- Country
- Canada
- Snowmobile
- Rx1
Chris Reid just posted a new blog post.
http://snowmobiles.yamahablogs.ca/2015/11/13/friday-the-13th/
"So when I read comments about BNG and ho-hum product launches, I take a deep breath and look around.
And I don’t see anyone here snoozing "
At this stage of course he can't say anything. Even him says there lots of balls still in the air and lots of changes at Yamaha. You know what, change is good!
CR " Balls still in the air " LOL
gytr done
Expert
- Joined
- Jan 8, 2015
- Messages
- 446
- Age
- 54
- Country
- Canada
- Snowmobile
- Rx1
Chang is good! : ) Let's just hope one of those " balls " don't hit us in the face. : (
gytr done
Expert
- Joined
- Jan 8, 2015
- Messages
- 446
- Age
- 54
- Country
- Canada
- Snowmobile
- Rx1
As far as Japan's economy is concerned, Q3 fell short of the street and has now pushed Japan into a recession. So that might put a bit of a " damper " no pun intended on these so called new all Japan snowmobiles. Same thing that happened a few years ago when the economy crashed. Yamaha announced that they would be pushing there sled development back a few years so they could wait for a better economy, now that Japan is in a recession the comments from CR on sled talk make sence about the balls in the air comment. Sounds like they don't know what to do.
Deeppow16
TY 4 Stroke Master
- Joined
- Oct 19, 2015
- Messages
- 1,159
- Age
- 29
- Location
- Montrose, Minnesota
- Country
- USA
- Snowmobile
- 2016 Arctic Cat M8000
2009 Yamaha Nytro MTX (Totaled)
2002 Polaris 600 XCSP (Sold)
1999 Ski-doo Formula 500 (Totaled)
I hope Yamaha comes up with something really sick. Maybe another chassis of their own would be nice to see. Not that I'm hating on the SR viper chassis I would just like to see something different. I wouldn't be opposed to something even lighter then the SR viper either.
whitedust1
TY 4 Stroke God
The sled market is in North America, Russia & Europe not in Japan. Sled sales very good in those locations.As far as Japan's economy is concerned, Q3 fell short of the street and has now pushed Japan into a recession. So that might put a bit of a " damper " no pun intended on these so called new all Japan snowmobiles. Same thing that happened a few years ago when the economy crashed. Yamaha announced that they would be pushing there sled development back a few years so they could wait for a better economy, now that Japan is in a recession the comments from CR on sled talk make sence about the balls in the air comment. Sounds like they don't know what to do.
pdiddy
TY 4 Stroke Junkie
- Joined
- Oct 12, 2004
- Messages
- 529
- Location
- Southern Maine
- Country
- USA
- Snowmobile
- '11 Apex; '16 Apex XTX; '18 Indy 600 SP;
Sneak Peek 2017 Yamaha's - Will be made in Canada!
timebomb
TY 4 Stroke Guru
i saw a CAD pic of a yamaha with an articulating front suspension. everything in front of the engine articulated. very interesting.....
but this was also a few years ago
but this was also a few years ago
Sasquatch
Lifetime Member
- Joined
- Apr 17, 2004
- Messages
- 3,699
- Location
- North Western Ontario
- Website
- www.dptc.com
- Country
- Canada
- Snowmobile
- Yamaha's
Just keep building the Apex is my only wish and keep it true to its roots!
YamaHank
Extreme
i saw a CAD pic of a yamaha with an articulating front suspension. everything in front of the engine articulated. very interesting.....
but this was also a few years ago
Could this be the "sidewinder" patent?
timebomb
TY 4 Stroke Guru
haha. i thought the same thing when i saw that they patented that name. time will tell
Mph
Veteran
- Joined
- Aug 10, 2015
- Messages
- 45
- Age
- 30
- Location
- Ontario
- Country
- Canada
- Snowmobile
- 2017 sidewinder
- LOCATION
- Ontario
Would be nice to see all new light weight yamaha made chassis with direct fuel injected 800 2 stroke and call it a srx.
craigwsrx
Lifetime Member
- Joined
- Feb 19, 2007
- Messages
- 139
- Location
- Fenton Mi.
- Country
- USA
- Snowmobile
- 2017 Sidewinder 27,000 miles
2009 Nytro xtx 31,000 miles
2006 Attak 26,500 miles
2003 RX1 13,500 miles
2000 Mountain Max 14,000 miles
1998 SRX Mountain 17,000 miles
1995 V Max 600
1979 SRX 440
1975 GPX 338
1973 GP 338
With all the hype over the motorcycle/ snowmobile at the snow shows I just hope their big new unit isn't one of these for 2017.
whitedust1
TY 4 Stroke God
800 2s never happen Yamaha made 2s obsolete in 2003.... Whatever they do will be 4s.Would be nice to see all new light weight yamaha made chassis with direct fuel injected 800 2 stroke and call it a srx.
- Status
- Not open for further replies.
Similar threads
- Replies
- 7
- Views
- 852
- Replies
- 2
- Views
- 787
- Replies
- 23
- Views
- 4K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.