Secondary clutch question

[ronzx9]

Guys,

I was checking my offset with the Hurricane tool and noticed something that doesn't look right. Are there supposed to washers between the helix and the secondary on the studs? It doesn't look like they should be there but the previous owner may have put them in. Any Idea why someone might do that?

 

[ROCKERDAN]

This was an early mod on 17s to help with coil bind when using stock spring.

With Dalton spring, not needed.

Dan

 

[ronzx9]

OK When I tighten up the helix without them it's putting a lot of pressure on the rollers. Is that normal
?

 

[Hammer70]

OK When I tighten up the helix without them it's putting a lot of pressure on the rollers. Is that normal
?

Yes that’s normal

 

[ronzx9]

Thanks guys

 

[Hammer70]

Thanks guys

Any time glad to help out

Pan

 

[Brian Friebel]

Took my secondary off to clean it up and to change my Helix back to a straight 35 verses the 33/35. I did not notice this when I changed the stock secondary spring to the Dalton Black/ Orange. Updated version so was set at 6-2. Anybody come across this on there secondary clutch? I never blew a belt yet with this sled. Is that going to be a problem do i need a new secondary?

 

[Chris Rose]

I noticed the same

Took my secondary off to clean it up and to change my Helix back to a straight 35 verses the 33/35. I did not notice this when I changed the stock secondary spring to the Dalton Black/ Orange. Updated version so was set at 6-2. Anybody come across this on there secondary clutch? I never blew a belt yet with this sled. Is that going to be a problem do i need a new secondary?View attachment 149584

I noticed the same on my helix while I was servicing the clutch. Called Dalton and was told that it's a normal thing and not to worry.

 

[ClutchMaster]

Took my secondary off to clean it up and to change my Helix back to a straight 35 verses the 33/35. I did not notice this when I changed the stock secondary spring to the Dalton Black/ Orange. Updated version so was set at 6-2. Anybody come across this on there secondary clutch? I never blew a belt yet with this sled. Is that going to be a problem do i need a new secondary?View attachment 149584

Normal rubbing, no worries.

 

[snowbeast]

Guys,

I was checking my offset with the Hurricane tool and noticed something that doesn't look right. Are there supposed to washers between the helix and the secondary on the studs? It doesn't look like they should be there but the previous owner may have put them in. Any Idea why someone might do that?

Yes ha must of been aware of spring bind with stock set up,and was trying to lessen that effect.