Some Guidance - Clutches apart

[rnusr01]

Hi Guys

So I have both primary and secondary clutches off. The secondary dismantled to install new spring and rollers. While its apart I wanted to clean everything before assembly here are my questions.

1. I am assuming brake cleaner is fine to use?
2. Should I use a scrotch brite or anything to smooth/clean/polish where the belt rides?
3. Should I put a small amount of grease where the shaft goes?
4. Any tips tricks things I should be aware of?

Thank you

 

[Doc Harley]

How did you pull the primary off?

Green scotchbrite & acetone is what I've always used.

 

[rnusr01]

How did you pull the primary off?

Green scotchbrite & acetone is what I've always used.

Clutch puller tool it was easy

 

[krm]

Don't use grease on anything in the clutches .

 

[rnusr01]

Don't use grease on anything in the clutches .

I meant on the splined shaft the secondary goes on should that have a small amount of grease ?

 

[cannondale27]

I meant on the splined shaft the secondary goes on should that have a small amount of grease ?

I do because it rusts otherwise. Anti Sieze.

 

[rnusr01]

I do because it rusts otherwise. Anti Sieze.

Ok thank you

 

[Doc Harley]

Clutch puller tool it was easy

Where did you get it?

 

[cannondale27]

Where did you get it?

EPI makes a good one

 

[rnusr01]

Where did you get it?

https://epiperformance.com/yamaha-32/

 

[Doc Harley]

On order......thanks guys.

 

[silverram323]

https://epiperformance.com/yamaha-32/

I have the same one, works great.