With the issues with the primary clutches cracking or coming apart. What is everyone using to hold the clutch while torqueing it?
I always used to use a big bar through the clutch and wedged on the secondary.
I always used to use a big bar through the clutch and wedged on the secondary.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
murdered141
Snow Punisher
- Joined
- Nov 24, 2015
- Messages
- 1,456
- Age
- 43
- Location
- U.P Michigan
- Country
- USA
- Snowmobile
- Yamaha sr viper 15 ltx dx, mpi 190 turbo, straight line header, 38" mtx front end, mtx steering, mtx seat, xtx 141" skid and 2.25" power claw track
2019 sidewinder xtx le, sleeping for now
Same hereWith the issues with the primary clutches cracking or coming apart. What is everyone using to hold the clutch while torqueing it?
I always used to use a big bar through the clutch and wedged on the secondary.
![](/styles/vip.gif)
DMCTurbo
VIP Member
- Joined
- Nov 12, 2005
- Messages
- 2,786
- Age
- 51
- Location
- Val Caron, Ontario
- Country
- Canada
- Snowmobile
- 2017 Sidewinder XTX LE 137
I put a big prybar wrapped in rubber tape through the clutch and just hold it with my left hand while I torque with my right hand.
![](/styles/TYLifeMember.gif)
![](/styles/vip.gif)
Turboflash
Lifetime Member
- Joined
- Mar 18, 2019
- Messages
- 2,660
- Location
- Southern MN
- Country
- USA
- Snowmobile
- '17 ZR9000 Ltd. 137 - PEFI Stage 4
I have a tool similar to this one.
![38030032.jpg](/proxy.php?image=https%3A%2F%2Fwww.denniskirk.com%2Fdk%2Fproduct_images%2F38%2F75pix%2F38030032.jpg&hash=29b7b9b10ce30407a17190c26c63b1d1)
Similar threads
- Replies
- 4
- Views
- 3K