YAMAHEATER Nice Warm Hands for 03 - Current Yamaha 4 Strokes

[CaptCaper]

Hi Capt,
We will find out!
PMing you my number, will have you do some tests.
Let's get you going!
Rockmeister

Thanks for your help Friday.... look forward to getting some hot hands again.

 

[Rockmeister]

You are welcome Capt!

Will get you going!

Rockmeister

 

[Sledtastik]

Is this still available?

 

[Rockmeister]

They sure are!

Can order at www.rocztoyz.com
Scroll down the page.

You will like having Instant Warm Hands on COmmand!
Will get you going.

Rockmeister : )

 

[Hendo85]

So this is what I need for warm hands? Not new hand warmers eh?

 

[ApexGT06Canuck]

Looking to order a set for my 2006 Apex GT

I read that thumb warmers are increased with the regular yamaboost. Do I require the thumb boost as well?

Wanting to submit my order, with express shipping to Canada.

I attached screenshots for the two selections I'm stuck between.

Is there still a $10 discount for TY members I read in an earlier post?

Thanks in advance for all the info!

 

[Rockmeister]

Looking to order a set for my 2006 Apex GT

I read that thumb warmers are increased with the regular yamaboost. Do I require the thumb boost as well?

Wanting to submit my order, with express shipping to Canada.

I attached screenshots for the two selections I'm stuck between.

Is there still a $10 discount for TY members I read in an earlier post?

Thanks in advance for all the info!

View attachment 166272

View attachment 166273

Yes, mention that you are a TY VIP member & your TY username when you order.
You want the P&P with Boost + ThumbBooster Combo.
Just make sure you tell us what sled & year this is for.

Will get you going!

RockMeister

 

[Rockmeister]

So this is what I need for warm hands? Not new hand warmers eh?

Correct, you simply plug them in & you will have Instant Warm Hands on command.
Using your existing controls, grips, & display.

 

[fxnytrortxkid]

Hey rock, getting ready to install my hand a thumb kit for my sidewinder I got at big east this year. Wondered if you had any pics of where these modules mount.

 

[Rockmeister]

Hey Dude!

I zipty-ed mine under the harness on the bars.
Send me a text to the number on your instructions & will text you a pic.

Rock

 

[fxnytrortxkid]

Hey Dude!

I zipty-ed mine under the harness on the bars.
Send me a text to the number on your instructions & will text you a pic.

Rock

Will do. In morning. Don’t wanna bug you at night.

 

[NLP_SLED_GUY]

Does the Yamaheater tame the very stupid 03 RX1 heaters? Having to constantly reset them is ridculous.

 

[targabill]

YamaHeater Booster Install Instructions


Remove appropriate body panels & locate the following connectors:

2 output connectors from your YamaHeater (Orange & Black wires)
Brake connector (Blue/Red & Green wires)


Your YamaHeater Booster installs BETWEEN your existing YamaHeater & your grips.

1) Unplug the grips from your YamaHeater. (Grips have 2 small Black wires)
2) Plug both grips into output connectors with Orange & Black wires from Booster.
3) Plug input connector from Booster (Yellow & Black wires) into one of the output connectors from your YamaHeater (Orange & black wires).
4) Unplug brake connector with Blue/Red & Green wires & plug power connector from Booster with Blue & Green wires into open connectors from brake. (This connects power)
5) Install Black Ground wire with ring terminal under appropriate bolt for ground.
6) If you did not do so prior, change SIG fuse in sled fuse box (Small Black box on right side of sled near reverse mechanism), to blue 15A fuse provided.

Test for grips warming with sled running and in YamaHeater High Heat setting (RED LED, Zero Bars on display).
Allow sled to idle for a few minutes & verify grips are getting nice and WARM!
(Your grips should get SERIOUSLY WARM!)

As noted prior, the YamaHeater Booster will make ALL your heat settings warmer, including the YamaHeater High Heat setting (RED LED).

Mounting:
As it is a power conversion device, your Booster will get warm in operation, keep in mind to allow air flow around Booster.

The Booster Case is a shielded metal case that Cannot touch anything metal on your sled.
Make sure when you install the Booster, the case is isolated from any metal, including ground.

Let us know how it goes!

Rock

PS As always, can Call or PM/email me with your phone number & I will call you right back.

Is there a wiring diagram for this, it was in the Nytro I bought and some wires pulled out and would like to fix.. It has one box with Rocztoyz.com, rock solid quality written on it, not sure if thats the yamaheater or the booster you mention..

 

[MrSled]

Is there a wiring diagram for this, it was in the Nytro I bought and some wires pulled out and would like to fix.. It has one box with Rocztoyz.com, rock solid quality written on it, not sure if thats the yamaheater or the booster you mention..

You can always contact Rock Direct, he is great at helping on his products.

 

[RobX-1]

X2, even if you didn't purchase them, I'm sure Rock will be more than happy to help. Here's his contact info from his website.