Search results

I bought the Yamaha marginal snow wheel kit, think it was $60.. It worked to dramatically reduce the wear on my hyfax, which was all toward the rear, 1 foot in front of rear axle.. Installed in 1/2 hour. End of story.

Just the regular maintanence.. Check the rollers and weights for any excessive play every season, there was none. The rollers were clean and would spin nicely. Blew out clutches with air, no lube used. The normal stuff.. This was, without a doubt, a casting defect in the fork that holds the...

08 Nytro, 4500 miles.. Primary clutch blown apart and also took out driven clutch. Anyone else???? yet?? The casting that holds the rollers appears to have fractured and become a projectile. This just after having replaced a center shock last week because its shock body exploded, actually...

Do you really gain much from these kits over stock. I was most impressed with the stock set-up on mine, especailly with the 4-stroke torque.. What more could you want, I pull the front like Im on my KTM 505, hit peak rpm, sometimes on hard pack hit my rev limiter slightly, and the things...

Im sorry, but Ive got to say it.. DOES ANYONE ON THIS SITE USE A SERVICE MANUAL.. My god..... Im a trained tech, with over 30 years, and I still dont work on anything without a manual.. CMON PEOPLE!!!! Sorry, it had to be said.

You will tend to feel the center shock action more thru your feet and the rear shock thru your butt. When riding it, think of it that way, feel for it that way. Make adjustments according to that feel. At least, thats what I do. But, honestly, I have not even really tweaked mine from stock.. Im...

I guess it depends on were your hyfax is occurring. Mine is approximately 1 foot from the rear axle. No wear at the bends. Well, looking at many other sleds in a parking area, most brands had an extra set of internal wheels right about where my wear is. But, not this Nytro. I ordered the Yami...

Check you oil level correctly.. I was getting a lot of oil in my air box, and it would run down the front of the engine. Actually, the machine started to cut out when hot, and left me stranded a few times. I believe it was oil getting on the temp sensor in the box.. My fix was to add an overflow...

Arteeex, Got the warmers working, not really sure how, but they are working... Go figure, they fixed themselves over the summer, I'll take it. Started off by again, checking the RSI warmers, and they tested good. I hooked them back up to stock wiring per the RSI instructions Blue&white to one...

Arteex, I've been working on everything but the grips. Machine totally striped down again, shocks sent out. Warranty: Exhaust header and gaskets (welds broke at header brkt), new ball joints (third time) 3500 miles.. Had to remove A-arms this time around, as one is putting up a fight and doesnt...

Yep, mine were cracked right at the bolts, both sides.. Covered under warranty

No, I did not try that for a couple of reasons. As I mentioned, when using the diagnostic test mode, they do work, they heat up quickly.. Based on that, I thought that confirmed my installation was correct, as far as wiring and connections. Also, I want to hook up thru the Yamaha...

I got carried away and forgot to answer one of your questions. I stuck the elements right on the bars.. I work pretty meticously, so the bars were cleaned and connectons were made pretty good.. I dont sodder, but rather use good butt connectors with proper crimping tool (MAC $100). Can not...

RSI heated grips I am going on some memory here, because I went thru this last season and just bringing my Nytro back into my shop now. I ride motorcycles, so it never ends. Anyhow, at the time, I did check all connections, had the resistance thru each element, and nothing was making sense...

RSI heated grips Need some help: Installed RSI heated grips on 08 Nytro, as I heard good things. After installation per RSI instructions, I went thru the test mode on the speedo unit, and the elements heated right up. However, once I put everything together and started the machine, I got an...

I had issues with oil in the airbox of my 08 nytro rtx.. Installed a cheap (old Castrol brake fluid container) "catch can" myself. I zip-tied to the front frame in front of the oil tank.. Rerouted my oil breather tube and a few other "overflows & such" into that.. Never had a problem. No codes...

Not sure of the part numbers, but the stock gearing is 21T upper and 39T lower. Most would think you can just throw a 22T upper for more top end. However, a longer chain is required to do this. YAMAHA DOES NOT RECOMMEND THAT SET-UP. That chain is too long and requires too much adjuster bolt to...

I had some cutting out issues with mine for about 4 rides.. Chased electrical stuff around. I believe I found my problem. Check your air box for oil. If you see that a lot of oil is dumping in there from the overflows, I believe it got on the air temp. sensor and was causing my problems. Only...

1 gallon of mobil 1 0w30 from walmart = $26.00 1 Hi Flo oil filter = $5.00 Doing it myself within 45 minutes and riding in an hour = priceless. Only having to do once a season, even better... (2-3K miles) (no rivets, the side panels come off with Dzus fastners, and the bellypan uses the...

Oh yeah.. Definitely.. I also enjoy motorcycle roadracing and trackdays, so I had pipes all over my shop.. My Hindle slipped right onto the header pipe under the seat. It is a little offset at the back, but still looks great.. The sound, nothing like it.. I get thumbs up from many.. Ive actually...