vroy7756
Extreme
- Joined
- Feb 11, 2015
- Messages
- 59
- Age
- 62
- Location
- Chatham, Ontario
- Country
- Canada
- Snowmobile
- 2019 SRX LE
2015 rtx-le sr viper 129" track
2010 rs ltx gt vector
track noise sounds grindy , sounds as if can is going around the spocket to far then release ,dealer checked out chaincase no issue , they thought possibly track pitch is off ,any thoughts
NYTurbo
TY 4 Stroke God
Drivers not aligned?
vroy7756
Extreme
- Joined
- Feb 11, 2015
- Messages
- 59
- Age
- 62
- Location
- Chatham, Ontario
- Country
- Canada
- Snowmobile
- 2019 SRX LE
2015 rtx-le sr viper 129" track
2010 rs ltx gt vector
That's sounds like a possibility , will ask mechanic if he check
Kuzzy
Expert
- Joined
- Dec 6, 2020
- Messages
- 442
- Age
- 43
- Location
- saskatchewan
- Country
- Canada
- Snowmobile
- 2020 yamaha sidewinder xtx se
2022 STX GT
2017 King Cat M9000
Trackshaft spinning inside the bearing? Mine made a similar noise from day 1, and this year I checked the shaft and sure enough it was spinning in the bearing. Bop driveshaft saver going on this year
Last edited:
DMCTurbo
VIP Member
- Joined
- Nov 12, 2005
- Messages
- 2,759
- Age
- 51
- Location
- Val Caron, Ontario
- Country
- Canada
- Snowmobile
- 2017 Sidewinder XTX LE 137
More details would help. Did you just buy the sled? Recent track change? New driveshaft installed??? My 2017 made some sketchy track noise until it had some miles on it then she wore in and quieted down.track noise sounds grindy , sounds as if can is going around the spocket to far then release ,dealer checked out chaincase no issue , they thought possibly track pitch is off ,any thoughts
Turboflash
Lifetime Member
- Joined
- Mar 18, 2019
- Messages
- 2,497
- Location
- Southern MN
- Country
- USA
- Snowmobile
- '17 ZR9000 Ltd. 137 - PEFI Stage 4
Sometimes I've heard metallic noise just from new (low mile) rotors against brake pads (which have allot of metal in them). But I'd guess what's grinding is track shaft spinning inside bearing!
vroy7756
Extreme
- Joined
- Feb 11, 2015
- Messages
- 59
- Age
- 62
- Location
- Chatham, Ontario
- Country
- Canada
- Snowmobile
- 2019 SRX LE
2015 rtx-le sr viper 129" track
2010 rs ltx gt vector
Bought brand new , nothing first part of season 3rd trip to U.P. noticed backing out of trailer , can't replicate notice on hoist only driving forward or reverse when driving slow without helmet Hader to hear with helmet on, not sure if its track that's what mechanic says , said he went over bearings to checktrack noise sounds grindy , sounds as if can is going around the spocket to far then release ,dealer checked out chaincase no issue , they thought possibly track pitch is off ,any thoughts
vroy7756
Extreme
- Joined
- Feb 11, 2015
- Messages
- 59
- Age
- 62
- Location
- Chatham, Ontario
- Country
- Canada
- Snowmobile
- 2019 SRX LE
2015 rtx-le sr viper 129" track
2010 rs ltx gt vector
Kuzzy , which bearing , behind secondary ?
jonlafon1
Lifetime Member
- Joined
- Aug 18, 2014
- Messages
- 4,102
- Age
- 50
- Country
- USA
- Snowmobile
- 2022 Sidewinder LTX_SE
2024 Catalyst RXC
2017 Sidewinder LTX-SE. 11750 miles (SOLD)
He is speaking of the drive Axle/shaft bearing behind the Brake assembly
vroy7756
Extreme
- Joined
- Feb 11, 2015
- Messages
- 59
- Age
- 62
- Location
- Chatham, Ontario
- Country
- Canada
- Snowmobile
- 2019 SRX LE
2015 rtx-le sr viper 129" track
2010 rs ltx gt vector
The sound is , like a chain really loose and going around the spocket to far them releasing , if that makes any sense
vroy7756
Extreme
- Joined
- Feb 11, 2015
- Messages
- 59
- Age
- 62
- Location
- Chatham, Ontario
- Country
- Canada
- Snowmobile
- 2019 SRX LE
2015 rtx-le sr viper 129" track
2010 rs ltx gt vector
Ok , that's a fun bearing to get at if it's the same as my 15 viper
jonlafon1
Lifetime Member
- Joined
- Aug 18, 2014
- Messages
- 4,102
- Age
- 50
- Country
- USA
- Snowmobile
- 2022 Sidewinder LTX_SE
2024 Catalyst RXC
2017 Sidewinder LTX-SE. 11750 miles (SOLD)
One in the Same. Lots of posts on here about it..
vroy7756
Extreme
- Joined
- Feb 11, 2015
- Messages
- 59
- Age
- 62
- Location
- Chatham, Ontario
- Country
- Canada
- Snowmobile
- 2019 SRX LE
2015 rtx-le sr viper 129" track
2010 rs ltx gt vector
It's clunk and or grind sound
Is it doing it only on a stand? If so it could just be normal.
vroy7756
Extreme
- Joined
- Feb 11, 2015
- Messages
- 59
- Age
- 62
- Location
- Chatham, Ontario
- Country
- Canada
- Snowmobile
- 2019 SRX LE
2015 rtx-le sr viper 129" track
2010 rs ltx gt vector
Do not hear it on the stand , heard when I back the sled out of the trailer yesterday .,
Similar threads
- Replies
- 23
- Views
- 4K
- Replies
- 57
- Views
- 13K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.