Finally home...

[Redbeard]

Shame on you. You know better.

Forgive me my TY brethren!

 

[MrSled]

Few updates: Running Stage 2 Flash, Added a new Yamaha Front Bumper and added my Modified Viper Windshield.

So for 760 miles and the Igrips are doing well. Oils are changed, chain-case tension is now adjusted, track tension is checked and reset. I did have 2 out of 3 rollers with flat spots. Those will be going into Yamaha for Warranty.

I also have some shock settings and set up that I have been messing with and when I get that to my liking I will post those as well.

 

[steiner]

Good looking sled my friend. I think it would look better sitting on some white stuff instead of the stand.

 

[bleedyamaha]

Nice windshield trim job. Do you know how much the chain case tensioner was turned?

 

[Snowaddict]

Few updates: Running Stage 2 Flash, Added a new Yamaha Front Bumper and added my Modified Viper Windshield.

View attachment 125736 View attachment 125737 View attachment 125738

So for 760 miles and the Igrips are doing well. Oils are changed, chain-case tension is now adjusted, track tension is checked and reset. I did have 2 out of 3 rollers with flat spots. Those will be going into Yamaha for Warranty.

I also have some shock settings and set up that I have been messing with and when I get that to my liking I will post those as well.

Any belt issues? Or bind? Are you running stock clutching?
Your sled looks great btw.

 

[MrSled]

Nice windshield trim job. Do you know how much the chain case tensioner was turned?

I turned it in maybe 2 1/2 full turns until finger tight and then back out to the recommended 1 1/2 turns.

Any belt issues? Or bind? Are you running stock clutching?
Your sled looks great btw.

No belt issues at all. Very little belt dust with stock belt. I am currently running an Ulmer Clutch kit.

 

[Redbeard]

...and added my Modified Viper Windshield.

That windshield looks awesome!

 

[aquaticlaker]

Few updates: Running Stage 2 Flash, Added a new Yamaha Front Bumper and added my Modified Viper Windshield.

View attachment 125736 View attachment 125737 View attachment 125738

So for 760 miles and the Igrips are doing well. Oils are changed, chain-case tension is now adjusted, track tension is checked and reset. I did have 2 out of 3 rollers with flat spots. Those will be going into Yamaha for Warranty.

I also have some shock settings and set up that I have been messing with and when I get that to my liking I will post those as well.

Glad to hear the Igrips are going well! I had ordered some In December and they just arrived yesterday. Delivery from them is slow to say the least.
Is that the stock 1.75 track that came with the sled?
Mike

 

[MrSled]

Glad to hear the Igrips are going well! I had ordered some In December and they just arrived yesterday. Delivery from them is slow to say the least.
Is that the stock 1.75 track that came with the sled?
Mike

Mines an LE. Rip saw II

 

[aquaticlaker]

Mines an LE. Rip saw II

Ok thanks! Thought you had the crossover X-TX 137 LE

 

[Silkysmooth3popper]

Looks great. I also installed that same front bumper on mine. What did u think of those rivets that they give you? Lol what a joke. You have to be superman or have a huge rivet gun to make them work. I finally cut them off and used small bolts instead. Not impressed.

 

[MrSled]

Looks great. I also installed that same front bumper on mine. What did u think of those rivets that they give you? Lol what a joke. You have to be superman or have a huge rivet gun to make them work. I finally cut them off and used small bolts instead. Not impressed.

I agree, even when you do get them to crimp with a good riveter that don't pull tight.

 

[hooknbook]

When i ajusted my chain case with 500 mi on it. It must of moved in a 1/2 inch in .

 

[**sj**]

Few updates: Running Stage 2 Flash, Added a new Yamaha Front Bumper and added my Modified Viper Windshield.

View attachment 125736 View attachment 125737 View attachment 125738

So for 760 miles and the Igrips are doing well. Oils are changed, chain-case tension is now adjusted, track tension is checked and reset. I did have 2 out of 3 rollers with flat spots. Those will be going into Yamaha for Warranty.

I also have some shock settings and set up that I have been messing with and when I get that to my liking I will post those as well.

nice windshield and trim job ; ) sled looks real sharp...

 

[MrSled]

nice windshield and trim job ; ) sled looks real sharp...

Thanks.. It would look better on some snow.