- Joined
- Jan 16, 2020
- Messages
- 48
- Reaction score
- 115
- Points
- 223
- Location
- Hamilton, On
- Country
- Canada
- Snowmobile
- 2020
- WEBSITE
- https://mainwaysolutions.ca
Mainwaysolutions.caMAK01 Kits tighten up those loose ARSII Front ends, No more squeaks and better tighter steering

Attachments
Last edited:


- Joined
- Apr 13, 2003
- Messages
- 21,618
- Reaction score
- 9,248
- Points
- 2,103
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
Mainwaysolutions.caMAK01 Kits tighten up those loose ARSII Front ends, No more squeaks and better tighter steering
![]()
Another great product!!


DennyTuna
RIP-Logan-Dylan-Never forgotten!
- Joined
- Jan 28, 2017
- Messages
- 752
- Reaction score
- 654
- Points
- 1,038
- Location
- Ohio
- Country
- USA
- Snowmobile
- 25 Winder LTX LE
18 Winder LTX 50th
97 SX Vmax 600 (red)
Don't forget to add the bell crank bushing kit. This combo takes all the slop out of the entire front end.
The big one to me is the bellcrank.
- Joined
- Jan 16, 2020
- Messages
- 48
- Reaction score
- 115
- Points
- 223
- Location
- Hamilton, On
- Country
- Canada
- Snowmobile
- 2020
- WEBSITE
- https://mainwaysolutions.ca


- Joined
- Apr 13, 2003
- Messages
- 21,618
- Reaction score
- 9,248
- Points
- 2,103
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
I like that.. we should move this into the Sidewinder section. I think you will get more traffic on it.
- Joined
- Jan 16, 2020
- Messages
- 48
- Reaction score
- 115
- Points
- 223
- Location
- Hamilton, On
- Country
- Canada
- Snowmobile
- 2020
- WEBSITE
- https://mainwaysolutions.ca

fxnytrortxkid
TY 4 Stroke God
- Joined
- Apr 19, 2007
- Messages
- 1,582
- Reaction score
- 497
- Points
- 1,228
- Location
- Rensselaer, ny
- Country
- USA
- Snowmobile
- 09 nytro rtx
love mine so far. Whole front end is so tight and smooth now.
- Joined
- Jan 16, 2020
- Messages
- 48
- Reaction score
- 115
- Points
- 223
- Location
- Hamilton, On
- Country
- Canada
- Snowmobile
- 2020
- WEBSITE
- https://mainwaysolutions.ca
love mine so far. Whole front end is so tight and smooth now.
Thanks For letting us Know!
- Joined
- Jan 16, 2020
- Messages
- 48
- Reaction score
- 115
- Points
- 223
- Location
- Hamilton, On
- Country
- Canada
- Snowmobile
- 2020
- WEBSITE
- https://mainwaysolutions.ca
Check out some of our other snowmobile Products
If you have any feedback on something you have purchased, that would be Great to hear your story

If you have any feedback on something you have purchased, that would be Great to hear your story

REDLINE 1
Expert
- Joined
- Sep 20, 2019
- Messages
- 311
- Reaction score
- 262
- Points
- 478
- Location
- ROUND LAKE IL
- Country
- USA
- Snowmobile
- 2018 TCAT
I have the full kit works very well nice and tight. Only problem I have is getting them to accept grease on the control arms. Tolerance’s are pretty tight maybe they have to wear in some
- Joined
- Jan 16, 2020
- Messages
- 48
- Reaction score
- 115
- Points
- 223
- Location
- Hamilton, On
- Country
- Canada
- Snowmobile
- 2020
- WEBSITE
- https://mainwaysolutions.ca
I have the full kit works very well nice and tight. Only problem I have is getting them to accept grease on the control arms. Tolerance’s are pretty tight maybe they have to wear in some
Thanks for the reply, .003 clearance is tight. Your going to fill that cavity quick and the end clearance about .020 clearance so they don't slap back and forth. When greasing, 1 pump and let the pressure release. Greasing a sloppy hole is not much good but it would be easy

Are the uppers ok?
REDLINE 1
Expert
- Joined
- Sep 20, 2019
- Messages
- 311
- Reaction score
- 262
- Points
- 478
- Location
- ROUND LAKE IL
- Country
- USA
- Snowmobile
- 2018 TCAT
Upper and lower control arms are tight. There’s grease in them all Guess I’m just use to the old school ones where the grease would ooze out all over. Great product. Best part is the steering slop is totally goneThanks for the reply, .003 clearance is tight. Your going to fill that cavity quick and the end clearance about .020 clearance so they don't slap back and forth. When greasing, 1 pump and let the pressure release. Greasing a sloppy hole is not much good but it would be easy
Are the uppers ok?
Similar threads
- Replies
- 6
- Views
- 2K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.