• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Mainway Solutions

TY Advertiser
Vendor
Joined
Jan 16, 2020
Messages
48
Age
66
Location
Hamilton, On
Country
Canada
Snowmobile
2020
WEBSITE
https://mainwaysolutions.ca
Mainwaysolutions.caMAK01 Kits tighten up those loose ARSII Front ends, No more squeaks and better tighter steering:)
 

Attachments

  • MYK01.jpg
    MYK01.jpg
    172.8 KB · Views: 112
Last edited:

Don't forget to add the bell crank bushing kit. This combo takes all the slop out of the entire front end.
 
I like that.. we should move this into the Sidewinder section. I think you will get more traffic on it.
 
I have the full kit works very well nice and tight. Only problem I have is getting them to accept grease on the control arms. Tolerance’s are pretty tight maybe they have to wear in some
 
I have the full kit works very well nice and tight. Only problem I have is getting them to accept grease on the control arms. Tolerance’s are pretty tight maybe they have to wear in some

Thanks for the reply, .003 clearance is tight. Your going to fill that cavity quick and the end clearance about .020 clearance so they don't slap back and forth. When greasing, 1 pump and let the pressure release. Greasing a sloppy hole is not much good but it would be easy:)
Are the uppers ok?
 
Thanks for the reply, .003 clearance is tight. Your going to fill that cavity quick and the end clearance about .020 clearance so they don't slap back and forth. When greasing, 1 pump and let the pressure release. Greasing a sloppy hole is not much good but it would be easy:)
Are the uppers ok?
Upper and lower control arms are tight. There’s grease in them all Guess I’m just use to the old school ones where the grease would ooze out all over. Great product. Best part is the steering slop is totally gone
 


Back
Top