I just purchased snowtracker aggressive model for my 06' Apex Attak. they came in a bag that was in rough shape (carbides, threads, and blades look fine) without any instructions. I can figure out where to drill the hole but I was wondering about sled setup. My current plan was to set the front arms to level by backing off of the spring collars on the front shocks. Its the rear setup thats no clear from what little documentation they have online. Does anyone have a copy of the printed instructions they can share (pdf, scan, or camera image).
Also, while I was trying to understan0d the warning instructions that are posted on the snowtracker site and as I was looking around the attak I noticed that I am missing this part.
Which I believe is 8ED-47422-00-00 Can anyone verify this.
Given its location at the front of the slide rail, is the suggestion to not run until this is replaced or give-er and hope for the best..
Also, while I was trying to understan0d the warning instructions that are posted on the snowtracker site and as I was looking around the attak I noticed that I am missing this part.
Which I believe is 8ED-47422-00-00 Can anyone verify this.
Given its location at the front of the slide rail, is the suggestion to not run until this is replaced or give-er and hope for the best..