See Yamadog, you've already helped three fellow sledders with the same bag
Birkebeiner
oh that warms the cockles of my hart!!!!!! I do like the windshield trim or split hose Idea .....
why didn't I think of that.
stingray719
TY 4 Stroke God
Cause when they said split hose you thought they said split tail!
rocco17
Newbie
- Joined
- Mar 8, 2014
- Messages
- 15
- Reaction score
- 0
- Points
- 61
- Location
- morral, ohio
- Country
- USA
- Snowmobile
- 2015 SR VIPER LTX
used fuel line and silicon on mine. but didnt take off small bag just went over it
Joe ltx-le
TY 4 Stroke God
- Joined
- Mar 26, 2015
- Messages
- 1,524
- Reaction score
- 589
- Points
- 988
- Location
- Beaverbank-ns
- Country
- Canada
- Snowmobile
- 2017 sidewinder ltx-dx
Stupid seat bolt I bought for 30 dollars defiantly won't work
Cause when they said split hose you thought they said split tail!
CRAP now why didn't I think of THAT
Last edited:
birkebeiner
Lifetime Member
- Joined
- Jul 27, 2009
- Messages
- 895
- Reaction score
- 102
- Points
- 718
- Location
- Norway
- Country
- Norway
- Snowmobile
- 2015 Yamaha SR Viper X-TX
Got my owner's manual and registration plate in the mail today. Time to start reading 
Birkebeiner
Birkebeiner
birkebeiner
Lifetime Member
- Joined
- Jul 27, 2009
- Messages
- 895
- Reaction score
- 102
- Points
- 718
- Location
- Norway
- Country
- Norway
- Snowmobile
- 2015 Yamaha SR Viper X-TX
Got the handlebar bag today, and put it on. Nice fit and plenty of storage, on both sides of the bar. I should have space for most items now
The sled also came with the goggle bag as well
I also removed the stock 12V aux output (or whatever it's called?) and replaced it with a dual USB output. I figured all rechargeable gadgets are powered via USB anyway so why not?
Birkebeiner
The sled also came with the goggle bag as well
I also removed the stock 12V aux output (or whatever it's called?) and replaced it with a dual USB output. I figured all rechargeable gadgets are powered via USB anyway so why not?
Birkebeiner
That's a great idea!Got the handlebar bag today, and put it on. Nice fit and plenty of storage, on both sides of the bar. I should have space for most items now
The sled also came with the goggle bag as well
I also removed the stock 12V aux output (or whatever it's called?) and replaced it with a dual USB output. I figured all rechargeable gadgets are powered via USB anyway so why not?
Birkebeiner
birkebeiner
Lifetime Member
- Joined
- Jul 27, 2009
- Messages
- 895
- Reaction score
- 102
- Points
- 718
- Location
- Norway
- Country
- Norway
- Snowmobile
- 2015 Yamaha SR Viper X-TX
I decided to do the air box mod. I bought some tools I thought would be perfect for the job, a pneumatic drill which you can put on many different drill bits, etc. Kind of like Dremel, but running on air. However, using a cutting wheel wasn't working as the plastic on the air box melted when cutting...
And the cutting wheel was a bit fragile
I used a 5 and 10 mm drill bit to drill out some guide holes in the corners
Then used this "dentist" drill bit to cut out the rest. I found this to work the best (of the tools I had).
Once that was done I used a round sanding drill bit to smooth out the edges. I left the frogskin support in there
Lastly, heated up that divider and bent it over. The plastic on this air box didn't bent over easily and I had to heat it for quite bit.
Birkebeiner
And the cutting wheel was a bit fragile
I used a 5 and 10 mm drill bit to drill out some guide holes in the corners
Then used this "dentist" drill bit to cut out the rest. I found this to work the best (of the tools I had).
Once that was done I used a round sanding drill bit to smooth out the edges. I left the frogskin support in there
Lastly, heated up that divider and bent it over. The plastic on this air box didn't bent over easily and I had to heat it for quite bit.
Birkebeiner
I have the cliff notes version.... Add oil, fuel hit start and GO!!!!Got my owner's manual and registration plate in the mail today. Time to start reading
Birkebeiner
yamadoo
Yamadoo is a snowmobile ' aholic'.
- Joined
- Jun 3, 2003
- Messages
- 3,645
- Reaction score
- 1,501
- Points
- 1,753
- Country
- USA
- Snowmobile
- 15 Viper STX DX red/white- GPS and KING AIR suspension 4kmiles
13 Apex XTX 45 anniversary RED/WHITE/BLACK 3K miles
10 Vector LTX Blue 9kmiles
11 Venture GT 4k miles
86 SnoScoot(2) for grand kids
GOOD JOB Looks good. How loud is the intake after these mods? Is it just a change of tone or is it a noticeable change in volume?
Yamadoo
Yamadoo
stingray719
TY 4 Stroke God
I decided to do the air box mod. I bought some tools I thought would be perfect for the job, a pneumatic drill which you can put on many different drill bits, etc. Kind of like Dremel, but running on air. However, using a cutting wheel wasn't working as the plastic on the air box melted when cutting...
And the cutting wheel was a bit fragile
I used a 5 and 10 mm drill bit to drill out some guide holes in the corners
Then used this "dentist" drill bit to cut out the rest. I found this to work the best (of the tools I had).
Once that was done I used a round sanding drill bit to smooth out the edges. I left the frogskin support in there
Lastly, heated up that divider and bent it over. The plastic on this air box didn't bent over easily and I had to heat it for quite bit.
Birkebeiner
LOOKS GREAT! Good work!
stingray719
TY 4 Stroke God
I couldn't tell any difference in sound, but we all hear differently. Those that have done the nose only mod like this one notice any noise?
birkebeiner
Lifetime Member
- Joined
- Jul 27, 2009
- Messages
- 895
- Reaction score
- 102
- Points
- 718
- Location
- Norway
- Country
- Norway
- Snowmobile
- 2015 Yamaha SR Viper X-TX
I haven't started her up yet so don't really know if there is any difference in sound. Hopefully it will add some punch to the mid range
Birkebeiner
Birkebeiner
birkebeiner
Lifetime Member
- Joined
- Jul 27, 2009
- Messages
- 895
- Reaction score
- 102
- Points
- 718
- Location
- Norway
- Country
- Norway
- Snowmobile
- 2015 Yamaha SR Viper X-TX
I figured out I wanted the possibility to strap stuff to the tunnel also when I'm not having the tunnel bag on, so I bought two Apex M-TX hooks.
They are stock tilted inwards so I had to straighten them out in order to fit with the tunnel bag
This is how they look stock
I have a 10 ton shop press which I used to straighten them out
A few coats of paint and riveted to the tunnel
I also took my grinder and rounded off the edges on the seat latch to prevent wear and tear on the tunnel bag. I also but a few rounds of tape, until I get some more useful to put on permanently
Birkebeiner
They are stock tilted inwards so I had to straighten them out in order to fit with the tunnel bag
This is how they look stock
I have a 10 ton shop press which I used to straighten them out
A few coats of paint and riveted to the tunnel
I also took my grinder and rounded off the edges on the seat latch to prevent wear and tear on the tunnel bag. I also but a few rounds of tape, until I get some more useful to put on permanently
Birkebeiner
