New 3 arm, trail version billet Accelerator Pro 4 primary clutch

[ROCKERDAN]

The clutch can be set up for any belt width, per request when purchasing.

So Terry, would you be able to set them up to run the 1.5" wide Cat belts, or Ultimax 827(Cat size) and then would that work with our stock secondary?

Dan

 

[NOS-PRO]

Yes, the clutch can be set to any width belt.

If you order a clutch, whoever orders a clutch.... just needs to specify when ordering.

It will work with your secondary.

 

[ktmhk53]

These clutches have been out awhile for a lot of racers with very good luck

But I understand the "trail" version of this clutch is new. Definitely will outlast the competitors race clutch which they say is trail-able and has cracked after 500 miles

Why is a race clutch, which is designed to handle far higher HP than a trail clutch, more likely to crack?

 

[Nickatnight987]

Just seen this clutch at the novi show man was it hard to pass up, might be kicking myself for not buying it

 

[Keith Schmitz]

Curious...who ELSE bought one??

 

[Crossfire12]

Why is a race clutch, which is designed to handle far higher HP than a trail clutch, more likely to crack?

I’ll let you guys with the big money try it, let me know how it works after 1000 miles, then I’ll spend the money. I wonder what kind of warranty these clutches have for that price.

 

[NOS-PRO]

Keith, your clutch will be in my hands very soon. A lot of clutches were sold, including some 4 and 6 arm clutches.

These clutches are seriously jewels and have quality backing them up.

 

[Keith Schmitz]

Lol! You guys are the one vendor I’m NEVER concerned about. I know it’ll be fine, and if it’s not, Im quite sure you’ll make it “right”!

 

[Thunder Products]

Lol! You guys are the one vendor I’m NEVER concerned about. I know it’ll be fine, and if it’s not, Im quite sure you’ll make it “right”!

You betcha bud!

 

[staggs65]

Does this use the same weights and springs as a stock primary? So if we already have a clutch setup we can swap everything over?

 

[Thunder Products]

Does this use the same weights and springs as a stock primary? So if we already have a clutch setup we can swap everything over?

The weights you can use your weights, or any weight that I have witnessed.

There was one guy who brought over some God awful 1" wide weight which I have never seen before. He was told he would have to mill his weights down to fit the Accelerator 3 clutch. The pocket where the weights go is .622" width.

As for a spring, I am glad you asked as this billet clutch will use a TRA spring. The reason is because the spider would have to be cut bigger diameter for the Yamaha spring.

 

[ROCKERDAN]

The weights you can use your weights, or any weight that I have witnessed.

There was one guy who brought over some God awful 1" wide weight which I have never seen before. He was told he would have to mill his weights down to fit the Accelerator 3 clutch. The pocket where the weights go is .622" width.

As for a spring, I am glad you asked as this billet clutch will use a TRA spring. The reason is because the spider would have to be cut bigger diameter for the Yamaha spring.

Terry, so this will take dalton adjustables, same as many of us are running? Would they be similar range? 77g or so Im running now.

This would make the overall cost a bit more tolerable for sure.


Dan

 

[Thunder Products]

Terry, so this will take dalton adjustables, same as many of us are running? Would they be similar range? 77g or so Im running now.

This would make the overall cost a bit more tolerable for sure.


Dan

Yes, they will fit.

Any weight that is .622" wide or narrower

 

[dsimonRX1]

I want one. Are there any left from the first batch of 25?

 

[JayM]

Any results on this clutch from those that have bought?