NLVMAX'S Nytro SE Garage: Mod Update

[NLVMAX]

Tested out the Stage 1 and all I can say is it "WOW". Very pleased with this clutch set up. Ulmer knows what he's at.
She just rips hard now. Much better than stock. Guys, don't hesitate. This is a winner.

Did your top end improve?

Small bit.

Low end is improved and mid. No trouble to tell. I want the low to mid over top end. Just the way I ride. 600-800 feet is where I shine.

Like I said, "this is a winner."

 

[sheetwright]

Tested out the Stage 1 and all I can say is it "WOW". Very pleased with this clutch set up. Ulmer knows what he's at.
She just rips hard now. Much better than stock. Guys, don't hesitate. This is a winner.


Tether Switch Install

Well, entering races here on the Rock this coming weekend so I just installed the tether switch from http://www.ulmerracing.com/ He has instruction on his website. Very simple to install.

If you order anywhere else make sure you buy a closed tether. Installation took me around 20-30 minutes. Only thing I didn't like was having to extend the wires. They should come long enough to fit any sled.

Here are a couple pics. Now I'm legal to race.

This is funny. Wish you were near my location. I am putting the MPI stage two supercharger on mine now. Wondering is more of a nut with their sled?I just talked to Allen today about possibly putting the kit on with the Meth. He wlaked me through it and so did Heath from MPI. Great guys to talk to. Looks like you enjoy your addiction as much as I do. Great job, keep it going

 

[Tobbe...]

Like climbing a wall!

Looks like you died and went to heaven! Beautiful!

 

[NLVMAX]

This is funny. Wish you were near my location. I am putting the MPI stage two supercharger on mine now. Wondering is more of a nut with their sled?I just talked to Allen today about possibly putting the kit on with the Meth. He wlaked me through it and so did Heath from MPI. Great guys to talk to. Looks like you enjoy your addiction as much as I do. Great job, keep it going

Yes, it is an addiction but a good one. Well, looks like you are the bigger nut with your latest mod. How did the install go and if you don't mind, share some pics.
Now, you got me thinking. This one could hurt. LOL

 

[sheetwright]

This is funny. Wish you were near my location. I am putting the MPI stage two supercharger on mine now. Wondering is more of a nut with their sled?I just talked to Allen today about possibly putting the kit on with the Meth. He wlaked me through it and so did Heath from MPI. Great guys to talk to. Looks like you enjoy your addiction as much as I do. Great job, keep it going

Yes, it is an addiction but a good one. Well, looks like you are the bigger nut with your latest mod. How did the install go and if you don't mind, share some pics.
Now, you got me thinking. This one could hurt. LOL

Everything is shipping as I type. I will be running 10LB's of boost which makes Ulmer think I will be about 250HP for a trail sled with my existing mod's. Should be fun! I will keep you posted with pics as it starts to come together.

 

[bagadonitz]

Like climbing a wall!

Looks like you died and went to heaven! Beautiful!

Here is a shot from the bottom from March 15th of this year.

 

[NLVMAX]

Very nice country. Spent 2 weeks around there and surrounding areas.
Looks like we just missed each other. I drove back on the 15th.


Also got some time to cut some birch and junipher and got some good use from my tow hitch. Who said a Nytro can't tow wood? LOL I would say it is ok for occasional work but she wasn't made for this full time. That's what a VK is for.

 

[NLVMAX]

PROJECT EXTENSION 136

I am extending my track to a 136". Thought about the 144 kit but decided on this. Rail extensions and tunnel extension.
I am in the preliminary stages, getting it ready to install, the rail ext's has arrived, just waiting on the new track and tunnel ext now. Had a tunnel ext here but not happy with it. Ordered another.

Removed bumper and rear flap, tail light and drilled out rivets to get the tunnel cap off. Also removed tow hitch which will be going back on soon. Waiting on the box to show. Just ordered it today.

Draining chain case

Removed brake disc and parking brake, Removed Chain case cover. Lots of washers and spacers. Take note of where it all goes.

Removed lower and top gear.

This is where I'm too now. Updates to come...

 

[arteeex]

And the sledge hammer in the last photo is for...?

 

[Grimm]

I had to do a double take at your pics NLVMAX. For a second there, it looked like you installed a spoiler on your seat...that would be awesome...not!

 

[sheetwright]

Man you do everything top notch! Your thread looks like orange county and makes mine look like pimp my ride;0)

 

[NLVMAX]

And the sledge hammer in the last photo is for...?

LOL! Not sure on that but not what you maybe thinking.


Hey sheetwright, any updates on the project? Still collecting goodies I bet...

 

[sheetwright]

And the sledge hammer in the last photo is for...?

LOL! Not sure on that but not what you maybe thinking.


Hey sheetwright, any updates on the project? Still collecting goodies I bet...

I just saying your thread is like a book. If you want to know how to make a sled better, and install all of the best accessories; check out your thread.
Mine is more like this is what I did, and your thread is like this is how you do it.

As far as my summer project. The boost, meth, tunnel extension, track extension, and studs are all in. Waiting for pullies, skis, shockwave heilx, track, windshield, C&A XTX skis, and temp gauge to show up. Thinking of a new graphic package that will look tough, but a little different from what is on the trails. I will keep you informed. Good luck with yours Bud

 

[NLVMAX]

My new track showed up today. Camoplast 1.75" Backcountry

Spent a little more time dismantalling the suspension.

Remove (4) 14mm bolts. Two up front and two here.

Suspended the rear of sled first. Waiting on tunnel extension so I couldn't hang the rear from the bumper. Now the suspension can be taken out.

Might get to install the new track this weekend.

 

[Alatalo]

Camoplast 1.75" Backcountry

Good choice...