Threads intake manifold

[stickyfingers]

Does anyone know what threads the nipple for the hose to the roll over valve has ?

 

[KnappAttack]

Does anyone know what threads the nipple for the hose to the roll over valve has ?

I don't know of anything on or in the ROV system that is threaded or uses threaded nipples. It uses 5/8" hose I know. And you dont want to use heat hose either. It has to be made for fuel and/or oil.

 

[stickyfingers]

I don't know of anything on or in the ROV system that is threaded or uses threaded nipples. It uses 5/8" hose I know. And you dont want to use heat hose either. It has to be made for fuel and/or oil

I was thinking of the threads of the nipple 8KJ-14251-00 attached to the manifold,o rmaybe it is attached in another way?

 

[KnappAttack]

No clue what threaded nipple you’re talking about. Have a photo? The ROV does not attach to an intake manifold.

 

[RobX-1]

Here @stickyfingers, this may help...

 

[stickyfingers]

Yes, my thought was if that nipple could be replaced by a threaded plug and therfore I would like to know what thread teh nipple has

 

[KnappAttack]

That part has nothing to do with the ROV. That line goes to the boost sensor.

 

[MK4TDI]

Yes, my thought was if that nipple could be replaced by a threaded plug and therfore I would like to know what thread teh nipple has

That black hose attaches to the intake infront of the turbo on part #43. If it was attached to #20 it would blow off from the boost when you squeezed the throttle.

 

[REDLINE 1]

If yr talking about the nipple next to the turbo on the plastic crossover intake tube from the air filter. I just put a rubber cap on it